2065 Air Compressor Head 2.2KW 8KG

2065 Air Compressor Head 2.2KW 8KG

SKU:1401237
Application:2.2KW (3HP) belt-drive air compressors
Material:cylinders
Details explanation: 2065 / V-0.25/8; bore: 65mm × 2
Operating Temp :-30°C to +300°C
Packaging:Cardboard packaging
Delivery Time:30 Days
Send Inquiry
Add To Inquiry
Description

Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of 2065 air compressor head 2.2kw 8kg in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.

 

Product Introduction

2065 Air Compressor Pump Head 2.2KW - Twin-Cylinder Cast Iron Replacement Head for Belt-Drive Industrial Compressors

Model V-0.25/8 · 65mm Dual Cylinder · 250L/Min Displacement · 8 Bar Working Pressure · Fits 2.2KW 3HP Belt-Drive Compressor Assemblies

2065 Air compressor head 2.2KW 8KG

Industrial workshops that depend on continuous compressed air cannot afford extended compressor downtime - yet replacing the entire compressor when only the pump assembly has worn out represents an unnecessary cost that experienced service technicians routinely avoid by fitting a replacement pump head onto the existing motor, tank, and controls. The 2065 pump head is the replacement core for one of the most widely used pump configurations in workshop and light industrial settings: a twin-cylinder reciprocating design matched to a 2.2KW (3HP) electric motor, delivering 250 litres per minute at a working pressure of 8 bar (116 PSI) - output levels that sustain continuous operation of pneumatic impact tools, spray equipment, tyre inflation stations, and pneumatic clamping systems across automotive, fabrication, woodworking, and general industrial workshops.

Constructed from cast iron finished in a distinctive blue industrial enamel, the 2065 features two 65mm bore cylinders in a wide V configuration, finned cylinder head castings for passive air cooling, a large blue spoked flywheel for belt-drive coupling, a black corrugated inter-cylinder pressure hose, an orange oil fill cap and a red oil drain cap on the crankcase. Weighing 8KG, it is a direct replacement for worn 2065-specification pumps on 2.2KW compressors - restoring full flow and pressure without replacing the motor, tank, or control panel.

product-815-675
product-815-675

Technical Profiles & Materials

Blue Cast Iron Body with Finned Cylinder Heads for Continuous-Duty Thermal Management The pump body and cylinder barrels are cast from grey cast iron and finished with a blue industrial enamel that resists corrosion in workshop environments with oil mist, humidity, and solvent exposure. The finned cylinder head castings increase external surface area, promoting convective heat dissipation during continuous cycling at high ambient temperatures. Cast iron's thermal mass and conductivity allow the 2065 to sustain extended duty cycles without the progressive bore expansion that causes piston ring blow-by in aluminium pump bodies operating near their thermal limits.

V-Twin 65mm Cylinder Configuration with Corrugated Inter-Cylinder Pressure Hose The two 65mm bore cylinders are positioned in a V configuration from the shared crankcase, producing a combined displacement of 250 litres per minute through overlapping compression strokes that reduce peak pressure fluctuation at the outlet compared to equivalent single-cylinder designs. The black corrugated flexible hose connecting the two cylinder outlet ports accommodates differential vibration and thermal movement between the cylinder assemblies during operation, maintaining a leak-free inter-cylinder connection without the stress cracking risk of rigid pipe connections between moving components. Operating speed of 1,100 RPM balances displacement efficiency against component wear rate across the pump's expected service life.

Spoked Flywheel and Accessible Oil Fill and Drain Cap System The large blue spoked flywheel provides the belt contact surface for motor-to-pump drive coupling and contributes rotational inertia that smooths cyclic torque variations, reducing crankshaft bearing load reversal frequency. The orange oil fill cap and red oil drain cap are positioned on the crankcase for access during oil changes without removing the pump from the compressor frame, enabling scheduled oil service to be completed quickly in the installed position. This accessible maintenance layout reduces scheduled service time and ensures correct oil level is maintained consistently across shift-change inspections.

 

Technical Specifications

 

 

ITEM DETAILS
Type Twin-Cylinder Reciprocating Pump Head
Application 2.2KW (3HP) belt-drive air compressors; automotive workshops, fabrication facilities, woodworking shops, tyre service stations, light industrial pneumatic tool systems
Code 1401237
Material Cast iron body and cylinders (blue enamel); cast iron spoked flywheel; black corrugated inter-cylinder hose
Details explanation Model: 2065 / V-0.25/8; bore: 65mm × 2; displacement: 250L/min; working pressure: 8 bar (116 PSI); max pressure: 8 kg/cm²; speed: 1,100 RPM; weight: 8KG; oil-lubricated
Brand Name SeaSummer
Operating Temp --10°C to +45°C
Delivery Time 30 Days
Packaging Cardboard packaging

 

Products Application

 

 

product-1000-1000

Pump Head Replacement on Worn Belt-Drive Workshop Compressors

Technicians fit the 2065 pump head when an existing 2.2KW belt-drive compressor loses pressure output, develops excessive valve noise, or fails to hold working pressure due to cylinder bore wear, piston ring failure, or valve plate damage that cannot be restored by valve service alone. The replacement pump is mounted onto the existing tank frame, flywheel aligned to the motor pulley with correct belt tension, crankcase filled with compressor oil through the orange fill cap, and commissioned with a pressure test before returning to workshop service. This pump-head-only replacement recovers full 250L/min flow and 8 bar working pressure at significantly lower cost and downtime than replacing the complete compressor assembly.

product-1000-1000

Valve Plate and Oil System Inspection on the Workshop Workbench

Before installation, the technician removes both finned cylinder head valve covers and inspects the reed valve plates and valve seats for manufacturing defects, carbon deposits, or shipping damage that would prevent full volumetric efficiency from the first operating hours. The crankcase is checked for correct oil fill level through the indicator, and the orange fill cap and red drain cap threads are verified for leak-free seating before the pump is mounted. This pre-installation bench check eliminates the risk of commissioning a new pump head with a pre-existing valve defect or incorrect oil level that would cause reduced pressure output or accelerated bearing wear.

product-1000-1000

Continuous Compressed Air Supply for Industrial and Automotive Workshop Operations

Once installed and commissioned on a correctly sized 2.2KW motor and receiver tank, the 2065 delivers continuous compressed air at 8 bar for the full range of pneumatic tools that drive industrial and automotive workshop productivity - impact wrenches, ratchets, air chisels, spray guns, pneumatic grinders, tyre inflation, and blow-down operations. The cast iron cylinder construction and 1,100 RPM operating speed position the 2065 as a sustained-duty pump suited to multi-shift environments where continuous compressor cycling is the normal operating condition, rather than an intermittent-duty pump appropriate only for light single-shift use.

Quality and Craftsmanship Details

 

product-1920-1920

 

product-1920-1920

 

Products Package

 

 

product-1920-2560

 

About Us

 

 

Jiaxing Norsun Trading Co., Ltd.

As a premier garden machinery parts supplier, Jiaxing Norsun Trading Co., Ltd. bridges global distributors with over 100 vetted China manufacturers. We streamline your B2B supply chain through strict quality control, flexible production, and factory-direct wholesale pricing. Partner with us for reliable, high-volume sourcing of precision-engineered outdoor power equipment components.

Trusted Partnership Power

YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS

Verified Factory Excellence

BACKED BY 200+ TRUSTED FACTORY PARTNERS

Production process

 
-1
Assembling
-2
CNC Machining Center
-8
CNC Lathe
-5
Tapping Machine
-3
Tapping Machine
-7
Injection Molding Machine
-4
Inspecting
-6
Warehousing

Quality control

 
-1
-3
-4
-2

Expo experience

 

 

product-2000-2667

 

Customer Reviews

 

 

product-2000-2667

 

 

FAQ

 

 

Q: Are you an impartial industrial components dealer or a direct China water pump factors factory?

A:We are a direct, ISO9001-certified engineering water pump components manufacturing facility and precision fluid-control factor manufacture exporter primarily based in China. We function our personal cleanroom injection molding bays, computerized ultrasonic welding arrays, computerized hydraulic stress check stations, and clean-room packaging lines, passing direct-factory wholesale price financial savings straight to your element procurement margins.

Q: Can your manufacturing unit furnish full certification forms for food-contact or consuming water compliance?

A: Yes, absolutely. For food, beverage, or scientific applications, our manufacturing unit makes use of one hundred percent virgin, un-recycled polypropylene resins accompanied by means of fabric traceability certificates. We mechanically furnish B2B purchasers with complete FDA compliance documentation, NSF-grade compound declarations, and RoHS/REACH chemical protection screening sheets to make certain clean clearance thru worldwide customs.

Q: Do you provide customization picks for distinctly corrosive fluids like sturdy acids or ozone?

A: Yes, we are a thoroughly succesful OEM/ODM supplier. For aggressive chemical or ozone environments, we can improve the 12x26.5mm valve configuration in our factory: substituting the general PP housing with top class PVDF (Fluoropolymer) and changing any steel springs with Hastelloy or whole springless gravity-ball architecture, making sure final chemical resistance.

Q: How do we impervious a pattern batch to execute computerized lifecycle and burst-pressure testing?

A: We relatively inspire complete laboratory contrast earlier than logging mass grant agreements. We can ship a pattern lot of 5-10 gadgets of our inventory 12x26.5mm take a look at valves for assessment (setup costs and DHL/FedEx air freight apply). Once the factors pass by your inner lifecycle verification and a formal wholesale quantity manufacturing contract or container run is locked in, the sampling charges are a hundred percent credited returned to your industrial balance.

 

Hot Tags: 2065 air compressor head 2.2kw 8kg, China 2065 air compressor head 2.2kw 8kg suppliers, Air Compressor 1 2 Mini Inner And Outer Ball Valves Copper, Air Compressor 1 8 Needle Valve 1 8, Air Compressor 12X220 Copper Plated Natural Color, Air Compressor 80 Plastic Muffler, Air Compressor Stator 25L 50L, Air Compressor Zinc Alloy Cross

Send Inquiry