Air Compressor Connecting Rod

Air Compressor Connecting Rod

SKU: 1401495
Dimensions: 30.0mm Big End Bore × 86.9mm Center Distance × 12.7mm (1/2") Small End Bore
Material: Die-Cast Aluminum Alloy (ZL104 / ADC12) with CNC Bored Bearing Journals
Design Features: Solid I-Beam Shank with Integrated Big-End Splash Lubrication Dipper Needle
Applications: 2051-series dual-cylinder and single-cylinder piston air compressor pump heads (51mm cylinder bore)
Lead Time: 30 Days (Custom packaging & OEM supported)
Send Inquiry
Add To Inquiry
Description

Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of air compressor connecting rod in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.

 

Product Introduction

Air Compressor Connecting Rod (2051 Type)

Aluminum Alloy Connecting Rod (30 × 86.9 × 12.7 mm) with Integrated Splash Dipper for 51mm Bore Piston Compressors

Crankshaft Connection and Integrated Splash Lubrication

In 2051-series piston air compressor pump heads, the connecting rod transfers rotational drive from the crankshaft into reciprocating linear movement for the 51mm piston. This one-piece aluminum alloy rod features an integrated oil dipper needle on the outer edge of the big end. As the crankshaft turns through the bottom of its stroke, the dipper dips into the crankcase oil reservoir, splashing oil mist upward to lubricate the cylinder walls, wrist pin, and crankpin journal.

Center Distance and Journal Alignment

The rod is machined with an 86.9mm center-to-center distance, designed to maintain correct top-dead-center piston height in standard 2051 twin-cylinder pump heads. The big-end bore measures 30.0mm to fit the crankshaft journal, with an 18.0mm big-end width and 14.0mm small-end width (fitted with a 12.7mm / 1/2" wrist pin bore) to provide axial alignment within the piston skirt and crankcase webs.

Die-Cast Aluminum Construction for Pump Rebuilds

Cast in aluminum alloy (ZL104 / ADC12) with recessed I-beam shank geometry, the rod maintains a light reciprocating mass to reduce vibration at standard motor speeds (800 to 1440 RPM). It is designed as a direct replacement component for worn, scored, or snapped connecting rods during air compressor pump servicing and factory assembly.

product-1024-1024
product-1024-1024

Technical Profiles & Materials

Die-Cast Aluminum Alloy (ZL104 / ADC12): Lightweight casting provides mechanical strength with tensile ratings over 240 MPa and hardness of 85–105 HBW. Resists continuous bending loads in crankcase oil temperatures from -20°C to +130°C.

Integrated Big-End Splash Dipper: Cast-in oil dipper pin scoops into the crankcase oil bath with every revolution to provide continuous splash lubrication without requiring an external oil pump.

CNC Precision Bored Journals: The 30.0mm big-end bore (+0.015mm tolerance) and 12.7mm small-end bore (+0.010mm tolerance) provide proper oil-film running clearance against standard crankshaft journals and steel wrist pins.

 

Technical Specifications

 

 

ITEM DETAILS
Type Air Compressor Connecting Rod (2051 Type)
Application 2051-series and 51mm cylinder bore piston air compressor pump heads
Code 1401495
Material Die-Cast Aluminum Alloy (ZL104 / ADC12); CNC Precision Machined
Details explanation 30.0mm Big End ID; 12.7mm Small End ID; 86.9mm Center Distance; Integrated Splash Dipper
Brand Name SeaSummer
Operating Temp -20°C to +130°C (-4°F to +266°F)
Delivery Time 30 Days
Packaging Cardboard packaging

 

Products Application

 

 

product-816-816

Incoming Inspection and Dipper Pin Check

Inspected on assembly workbenches using calipers and bore micrometers to check 30.0mm crankpin bore size, 12.7mm wrist-pin bore, 86.9mm center distance, and ensure the integrated dipper pin is straight and intact.

product-816-816

Crankcase Installation and Piston Assembly

Installed onto the crankshaft journal during crankcase assembly, aligned so the oil dipper points downward toward the oil pan, and pinned to the 51mm piston using a 12.7mm wrist pin and retaining clips.

product-816-816

Replacement for Damaged or Seized Conrods

Used to replace broken, seized, or knocking connecting rods during compressor overhauls resulting from low oil levels or bearing journal wear.

Quality and Craftsmanship Details

 

product-1500-1500

product-1500-1500

 

 

Products Package

 

 

 

 

About Us

 

 

Jiaxing Norsun Trading Co., Ltd.

As a premier garden machinery parts supplier, Jiaxing Norsun Trading Co., Ltd. bridges global distributors with over 100 vetted China manufacturers. We streamline your B2B supply chain through strict quality control, flexible production, and factory-direct wholesale pricing. Partner with us for reliable, high-volume sourcing of precision-engineered outdoor power equipment components.

Trusted Partnership Power

YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS

Verified Factory Excellence

BACKED BY 200+ TRUSTED FACTORY PARTNERS

Production process

 
-1
Assembling
-2
CNC Machining Center
-8
CNC Lathe
-5
Tapping Machine
-3
Tapping Machine
-7
Injection Molding Machine
-4
Inspecting
-6
Warehousing

Quality control

 
-1
-3
-4
-2

Expo experience

 

 

product-2000-2667

 

Customer Reviews

 

 

product-2000-2667

 

 

FAQ

 

 

Q: What is the function of the pointed pin extending from the big end?

A:That is an integrated oil dipper (splash pin). During crankcase rotation, it plunges into the oil pool at the bottom of the crankcase, splashing lubricant across the cylinder bore, piston skirt, and internal bearing surfaces.

Q: How do I measure my old connecting rod to confirm fitment?

A:Check three key dimensions with a digital caliper: the big-end bore inside diameter (30.0mm), the small-end wrist pin bore inside diameter (12.7mm / 1/2"), and the center-to-center distance between both holes (86.9mm). Also confirm if your original rod has an integrated splash dipper.

Q: Is this a one-piece solid rod or a split-cap bolted design?

A:This is a solid one-piece (integral) connecting rod for single-throw or assembled crankshafts where the rod slides directly over the crankpin without bolt-on caps.

Q: Can you produce connecting rods with different center distances or custom branding?

A: Yes. We offer custom aluminum die-casting for connecting rods across 2047, 2051, 2065, 3065, 2080, and 3090 compressor models, including custom casting numbers, center-to-center lengths, and private label packaging.

 

 

 

 

 

 

 

Hot Tags: air compressor connecting rod, China air compressor connecting rod suppliers, CBB60 60UF Capacitor, Air Compressor Muffler Plastic 1 2 Flat Angle, Air Compressor 1 4 Double Outer Ball Valve, Air Compressor 12X240 Copper Plated Natural Color, Air Compressor 3 8X3 8 Zinc Elbow 16 5X16 5mm, Air Compressor 12X230 Copper Plated Natural Color

Send Inquiry