C230 Brush Cutter Clutch

C230 Brush Cutter Clutch

SKU / Model: 0208045 | C230 Centrifugal Clutch Series
Material & Metallurgy: Sintered alloy steel friction shoes with high-temperature anti-wear formulation
Fitment & Dimensions: Φ52–54 mm outer diameter | 33–34 mm center-to-center stepped bolt hole spacing
Engagement Profile: 3500–4200 RPM engagement speed | Idle safety disengagement at ≤ 2800 RPM
Spring Dynamics: Heat-treated music wire coiled tension spring with fatigue-resistant retention hooks
Delivery Time: 30 Days
Packaging: Cardboard packaging
Send Inquiry
Add To Inquiry
Description

Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of c230 brush cutter clutch in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.

 

Product Overview & Operating Details

C230 Brush Cutter Clutch

Sintered Alloy Symmetrical Centrifugal Clutch Assembly for C230 & 2-Stroke Small Engine Power Equipment

 
 
product-1024-1024

Balanced Dual-Shoe Symmetry & Radial Expansion Geometry

In high-speed 2-stroke brush cutter engines running between 7000 and 10000 RPM, dynamic rotational imbalance causes severe crankshaft whip and early clutch drum bearing failure. The SeaSummer 0208045 Centrifugal Clutch utilizes a dual-shoe symmetrical geometry precision-sintered to tight mass tolerances. As engine speed accelerates past the 2800 RPM idle threshold, balanced centrifugal forces overcome the central coil spring tension, causing both friction shoes to pivot radially outward against the inner clutch drum wall with equalized clamping pressure.

High-Friction Sintered Metallurgy & Thermal Anti-Fade Resistance

Dense weed clearing, heavy brush cutting, and accidental blade jams subject clutch shoes to intense friction heating exceeding 250°C. Low-grade stamped or soft cast iron clutches experience rapid thermal expansion, surface glazing, and severe torque slippage under these conditions. The 0208045 friction shoes are hot-sintered from high-density powdered alloy steel blended with copper-iron anti-wear binders. The material maintains a stable friction coefficient under continuous thermal cycling, preventing power fade while resisting brittle fracture during sudden blade shock loads.

Precision-Tensioned Music Wire Return Spring

Reliable idle safety depends entirely on the return spring's mechanical tension consistency. A weakened spring allows the clutch shoes to drag against the drum at idle speeds, causing hazardous unintended blade rotation and rapid shoe wear. This assembly is equipped with a high-carbon music wire spring coiled under precise pitch controls and oil-quenched to relieve residual winding stresses. The spring maintains constant retraction force across tens of thousands of engagement cycles, ensuring prompt, crisp disengagement whenever the operator releases the throttle.

 

 

 

Technical Specifications

 

 

ITEM DETAILS
Product Standard Name C230 Brush Cutter Centrifugal Friction Clutch Assembly
Product SKU / Type No. 0208045
Brand Designation SeaSummer
Clutch Architecture Dual Symmetrical Friction Shoes with Central Coiled Tension Spring
Outer Diameter Range Φ52 mm – Φ54 mm (Precision Fit for Standard C230 Clutch Drums)
Mounting Center Distance 33 mm – 34 mm (Center-to-Center Stepped Pivot Eyelet Spacing)
Shoe Material Formulation Powder Metallurgy Sintered Alloy Steel with Anti-Wear Copper Matrix
Surface Finish Black Manganese Phosphate Corrosion-Resistant Coating
Engagement Speed Window 3500 – 4200 RPM (Full Torque Transmission Lockup)
Idle Release Threshold ≤ 2800 RPM (Complete Disengagement & Blade Stationary Safety)
Compatible Machines C230 Series Brush Cutters, String Trimmers, Shindaiwa & Komatsu Style Engines
Drive Bolt Interface Standard Stepped Shoulder Bolts with Wave Spring Washers
Delivery Time 30 Days
Packaging Cardboard packaging

 

Products Application

 

 

product-1024-1024

Bench Dimensional Verification & Spring Tension Inspection

Every production run of 0208045 clutch assemblies undergoes strict bench verification. Technicians inspect the outer arc diameter, pivot hole concentricity, 33–34 mm center spacing, and calibrated spring pull-off force to ensure exact alignment with factory engine flywheels.

product-1024-1024

Direct Stepped Bolt Installation on Flywheel Rotor

Installation onto the 2-stroke engine flywheel is straightforward. The stepped pivot eyelets slide over the mounting studs with stepped wave washers underneath, tightened to factory torque with a socket wrench to allow smooth, friction-free radial pivoting without axial wobble.

product-1024-1024

High-Torque Clearing in Dense Field Vegetation

Operating at full throttle, the clutch locks firmly into the clutch drum, transferring maximum engine torque directly to the cutting head. The assembly powers through thick woody brush, tall pasture grass, and agricultural field borders without slippage or power loss.

Quality and Craftsmanship Details

 

product-1500-1500

 

 

 

Products Package

 

 

product-1500-1500

 

About Us

 

 

Jiaxing Norsun Trading Co., Ltd.

As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.

One-Stop Sourcing Hub

YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS

Direct Factory Network

200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA

Production process

 
product-496-372
Injection MoldingPlastic & Rubber Parts
product-496-372
CNC Lathe TurningHigh-Precision OD/ID
product-496-372
CNC Machining CenterMulti-Axis Milling
-5
Precision TappingCalibrated Thread Pitch
product-496-372
Clean Assembly LineSemi-Automated Line
product-496-372
100% QC InspectionOptical & Pressure Test
product-496-372
Protective PackagingCardboard & Rust-Proof
-6
Warehouse & LogisticsFast Dispatch & Storage

Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing

 

Expo experience

 

 

product-1500-2000

 

Customer Reviews

 

 

product-1500-2000

 

 

FAQ

 

 

Q: What are the common symptoms of a worn or slipping brush cutter clutch?

A: The most common signs are the cutting blade spinning while the engine idles (indicating a stretched or broken return spring), sluggish acceleration under load despite full throttle (indicating glazed or worn friction shoes), or excessive metallic rattling inside the clutch housing caused by worn pivot eyelets

Q: Are the mounting bolts and washers included with the clutch assembly?

A:The 0208045 comes fully pre-assembled with the matched tension spring installed. Standard stepped shoulder mounting bolts and wave washers can be reused from the original equipment or ordered separately as part of our distributor hardware service packs.

Q: How does this sintered alloy clutch compare to organic bonded lining clutches?

A:Bonded organic friction linings tend to delaminate, crack, or burn under the high localized heat generated during heavy weed jamming. Our one-piece sintered alloy steel shoes are thermally homogeneous, eliminating lining separation and providing more than twice the service life under commercial clearing conditions.

Q: What are the bulk export packaging specifications and OEM options?

A:We supply export master Cardboard packaging cartons with inner protective blister packs or layered polybags (50 to 100 PCS per carton). Custom laser-etched part numbers on the shoe body, custom spring tension calibrations for specific engine curves, and private branding are supported under our standard 30 Days Delivery Time.

 

 

 

 

Hot Tags: c230 brush cutter clutch, China c230 brush cutter clutch suppliers, b45 c35 c230 b450 488 parts, B45 Brush cutter clip, B450 Needle Bearing, C230 Brush Cutter Clutch, C35 Gear Set 9T, B45 Carburetor Spring

Send Inquiry