Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of carburetor zama a015058 cit diaphragm in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
Carburetor Metering Diaphragm for ZAMA C1T Series (A015058)
Replacement Metering Diaphragm Assembly for Trimmers and Chainsaws

Product Introduction
This metering diaphragm is the primary pressure-sensing component in ZAMA C1T series carburetors. It regulates fuel delivery from the internal pump into the metering chamber based on engine demand.
During engine operation, air rushing through the carburetor venturi draws fuel from the metering chamber into the engine intake. As the fuel level drops, atmospheric pressure pushes the flexible diaphragm inward. The stainless steel center disc depresses the carburetor metering lever, lifting the inlet needle off its seat to let fresh gasoline enter. Once the chamber fills, the diaphragm relaxes, allowing the spring-loaded lever to close the needle.
The membrane is made of a fuel-resistant synthetic polymer that retains its flexibility when exposed to E10/E15 ethanol gasolines and 2-stroke mixing oils. The center contact button is stamped from SUS304 stainless steel with perimeter holes to prevent corrosion and wear from continuous contact with the metering lever.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product | Carburetor Metering Diaphragm Assembly |
| SKU | 2501067 |
| Brand | SeaSummer |
| OEM Cross-Reference | ZAMA A015058 / GND-83 Kit Component |
| Membrane Material | Fuel-Grade Synthetic Elastomeric Polymer |
| Center Disc Material | SUS304 Stainless Steel (Perforated Button Disc) |
| Membrane Thickness | Approx. 0.18 mm to 0.22 mm |
| Compatible Carburetors | ZAMA C1T Series (C1T-EL41A, C1T-W33A/B/C, C1T-Z014, C1T-200053A) |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Pre-Assembly Inspection
Check the diaphragm under good lighting. The polymer membrane must be smooth and pliable without wrinkles, tears, or pinholes, and the center stainless steel disc must be firmly riveted.

Stacking Order and Mounting Steps
Clean the metering chamber cavity and confirm the metering lever height is set flush with the body rim.
Place the composition metering gasket directly onto the aluminum carburetor body.
Lay the metering diaphragm on top of the gasket with the center stainless steel button facing inward toward the lever.
Fit the metal bottom cover over the diaphragm and tighten the M3 corner screws evenly in a criss-cross pattern to approximately 1.0 N·m.

Common Fuel Symptoms Solved
Replacing a stiff or wrinkled diaphragm cures hard cold starting, erratic idle hunting, bogging during sudden acceleration, and lean fuel starvation at full throttle.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:Which carburetors and machines use this diaphragm?
A: It fits ZAMA C1T series carburetors (such as C1T-EL41A, C1T-W33 series, C1T-Z014) commonly installed on Husqvarna string trimmers, clearing saws, and small chainsaws.
Q: What is the correct stacking order for the metering side?
A:On ZAMA C1T carburetors, the gasket goes on the carburetor body first, followed by the diaphragm, and then the metal bottom cover.
Q: How often should the metering diaphragm be replaced?
A:Diaphragms should be inspected annually or whenever ethanol fuel has sat in the carburetor over winter storage. Hardened or puckered diaphragms should be replaced immediately.
Q: What are the bulk export packaging details and delivery terms?
A:Diaphragms are packed flat in anti-static protective bags inside export Cardboard packaging to prevent creasing. Standard production lead time is 30 Days.
Hot Tags: carburetor zama a015058 cit diaphragm, China carburetor zama a015058 cit diaphragm suppliers, RK 15HU Carburetor Repair Kit, 937 05145 679CC Brush Cutter Air Filter, 1L Fuel Tank Mixer, other brush cutter parts, Brush Cutter Overflow Valve Needle Valve, Fuel Tank Mixer 1L Ratio 20 1 50 1

