Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of t25 brush cutter trimmer head in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
Brush Cutter T25 Bump Feed Trimmer Head (M10×1.25 LH)
Tap Advance Semi-Automatic Line Head for ≤30cc Straight-Shaft Trimmers

Product Introduction
The T25 is a lightweight, semi-automatic bump-feed trimmer head engineered for light to medium-duty lawn trimming, grass edging, and weeding around flower beds, fences, and sidewalks.
Designed specifically for straight-shaft trimmers with engines up to 30cc, the head weighs only 376 grams to minimize rotational inertia, allowing rapid acceleration and crisp throttle response. Tapping the blue center knob against the ground while spinning advances fresh nylon line without needing to shut down the engine.
Inside the head, an independent split-spool design separates the two line channels to prevent the line wraps from tangling or friction-welding together under continuous high-RPM running (rated up to 13,300 RPM). The outer housing is molded from high-impact composite polymer that withstands regular contact with stone borders and paved walkways.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product | Brush Cutter T25 Trimmer Head |
| SKU | 2401062 |
| Brand | SeaSummer |
| Housing Material | Impact-Resistant Composite Polymer |
| Thread Size | M10 × 1.25 Left-Hand Female (M10L) |
| Line Diameter Range | Φ 2.0 mm to Φ 2.4 mm (.080" to .095") |
| Spool Line Capacity | Approx. 5.0 m (16.5 ft) of 2.4 mm line |
| Maximum Operating Speed | 13,300 RPM |
| Unit Weight | Approx. 376 g (13.26 oz) |
| Compatible Engines | ≤ 30cc (Husqvarna 122C, 128C, 223L, 223R, 323C, etc.) |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Fitment Check
Verify your trimmer gearbox has an M10 × 1.25 LH threaded spindle. Check that the internal split-spool rotates freely inside the housing.

Mounting Steps
Lock the gearbox arbor by inserting a pin into the gearcase locking hole.
Spin the T25 head counter-clockwise (left-hand thread) directly onto the threaded spindle.
Hand-tighten the head against the drive flange until seated. The head self-tightens during counter-clockwise operation.
Remove the locking pin before starting the engine.

Line Reloading Steps
Push the two side locking clips to release the cover. Fold your replacement line in half, anchor the center into the split-spool divider notch, and wind both sides neatly in the direction of the molded arrows. Thread the line ends through the eyelets and snap the cap into place.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:What is the difference between T25 and T35 trimmer heads?
A: The T25 is smaller and lighter (approx. 376g) with an M10L thread optimized for small engines up to 30cc, while the T35 is larger for 25cc–35cc commercial machines running thicker 2.7mm line.
Q: What trimmer line sizes work best with the T25 head?
A:It operates best with 2.0 mm (.080") or 2.4 mm (.095") nylon line in round, square, or low-noise spiral profiles.
Q: How does the split-spool prevent line jamming?
A:The spool has a physical center divider that isolates each line half into its own chamber, preventing the two strands from crossing over and tangling during bump feeding.
Q: What are the bulk export packaging details and delivery terms?
A:Heads are individually boxed or polybagged in master export Cardboard packaging. Standard production and delivery lead time is 30 Days.
Hot Tags: t25 brush cutter trimmer head, China t25 brush cutter trimmer head suppliers, 2 7mmX15m Trimmer Line 0 105 Square, 2 6mmX166m Trimmer Line Dual Color Square, T25 Brush Cutter Trimmer Head, M10X1,25 Trimmer Head, 2 7mmX15m Trimmer Line 0 105 Dual Round, 3 0mmX15m Trimmer Line Twist

