3800 Double Easy Starter

3800 Double Easy Starter

SKU: 0117070
Starter Type: Dual-spring assisted recoil starter (Easy-Start mechanism)
Shroud Material: Impact-resistant orange polymer housing with cooling vents
Rope & Handle: Φ 3.0 mm braided nylon pull cord with T-grip handle
Fitment: 3800 series 37.2cc–38cc chainsaws (Zenoah G3800, RedMax, Oregon JW3800)
Commercial Terms: Brand: SeaSummer | Delivery Time: 30 Days | Packaging: Cardboard packaging
Send Inquiry
Add To Inquiry
Description

Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of 3800 double easy starter in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.

 

Product Overview & Operating Details

3800 Chainsaw Double-Spring Easy Recoil Starter

Pull Starter Assembly for 37.2cc–38cc 2-Stroke Chainsaws

 
 
product-1024-1024

Product Introduction

This complete recoil starter assembly fits 3800-platform (37.2cc to 38cc) two-stroke chainsaws. It uses a dual-spring assist system to reduce the pulling resistance typically felt when turning the engine over against cylinder compression.

Inside the housing, the starter contains two separate springs: a main recoil spring that retracts the rope and a secondary torsion assist spring. When the operator pulls the handle, the assist spring coils up and stores tension. Once sufficient torque builds up, the spring releases stored energy directly to the starter pulley hub, spinning the flywheel smoothly past top dead center.

The outer shroud is molded from high-impact polymer with slotted cooling louvers to maintain direct airflow over the cylinder fins. The unit comes fully assembled with the inner pulley, starter dogs, 3.0 mm pull cord, and T-handle for direct bolt-on replacement without handling tensioned internal springs.

 

 

 

Technical Specifications

 

 

Parameter Specification
Product 3800 Chainsaw Double Easy Starter
SKU 0117070
Brand SeaSummer
Mechanism Dual-Spring Assist Recoil System
Shroud Material High-Impact Engineering Polymer
Internal Springs 65Mn / SK5 Alloy Spring Steel
Rope Diameter Φ 3.0 mm Braided Nylon
Mounting Pattern 4-Hole M5 Crankcase Flange
Engine Compatibility 37.2cc–38.0cc 2-Stroke (Zenoah G3800, RedMax G3800AVS, Oregon JW3800)
Delivery Time 30 Days
Packaging Cardboard packaging
   

 

Products Application

 

 

product-816-816

Pre-Installation Check

Inspect the four mounting eyelets and pull the cord out 10 cm by hand to confirm smooth engagement and complete spring return.

product-816-816

Mounting Steps

Clean debris and wood chips away from the flywheel and crankcase mounting bosses.

Position the starter shroud against the crankcase and gently pull the cord until the pulley hub teeth mesh with the flywheel starter pawls.

Push the shroud flat against the engine block.

Tighten the four M5 mounting screws in a cross pattern to 3.5–4.5 N·m.

product-816-816

Pulling Technique

Pull the handle smoothly outward until resistance is felt, then continue with a steady, continuous stroke. Avoid hard snapping or pulling the rope past its maximum travel limit.

Quality and Craftsmanship Details

 

product-1500-1500

 

 

 

Products Package

 

 

product-1500-1500

 

About Us

 

 

Jiaxing Norsun Trading Co., Ltd.

As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.

One-Stop Sourcing Hub

YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS

Direct Factory Network

200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA

Production process

 
product-496-372
Injection MoldingPlastic & Rubber Parts
product-496-372
CNC Lathe TurningHigh-Precision OD/ID
product-496-372
CNC Machining CenterMulti-Axis Milling
-5
Precision TappingCalibrated Thread Pitch
product-496-372
Clean Assembly LineSemi-Automated Line
product-496-372
100% QC InspectionOptical & Pressure Test
product-496-372
Protective PackagingCardboard & Rust-Proof
-6
Warehouse & LogisticsFast Dispatch & Storage

Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing

 

Expo experience

 

 

product-1500-2000

 

Customer Reviews

 

 

product-1500-2000

 

 

Practical Questions & Ordering

 

 

Q:How does this double-spring starter differ from a standard 3800 starter?

A: Standard starters pull directly against engine compression, requiring a sharp, high-effort tug. This easy-starter stores energy in an auxiliary spring during a smooth pull, releasing it automatically to turn the engine over.

Q: Will this starter fit all 3800 chainsaws?

A:It fits 3800 series saws (37.2cc / 38cc), including Zenoah G3800, RedMax G3800AVS, Oregon JW3800, and standard generic 3800 models, provided the flywheel uses matching starter pawls.

Q:Is the starter ready to install out of the box?

A:Yes. The assembly includes the plastic shroud, both internal springs, pulley wheel, starter cord, and handle already assembled and pre-tensioned.

 

Q: What are the bulk export packaging details?

A:Units are individually boxed inside export master cartons (Cardboard packaging). Standard manufacturing lead time is 30 Days.

 

 

 

 

 

Hot Tags: 3800 double easy starter, China 3800 double easy starter suppliers, 3800 Oil Pump, 2500 Adjusting Screw, 2500 Buffer Set 3pcs, 3800 Double Easy Starter

Send Inquiry