Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of 6200 chain saw cylinder assy in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
↵
Product Overview & Operating Details
6200 Chainsaw Cylinder and Piston Assembly
62cc Engine Rebuild Kit for Heavy-Duty Forestry Chainsaws

Product Introduction
This cylinder and piston rebuild kit is designed for 6200-series (62cc) two-stroke gasoline chainsaws used in commercial logging, firewood processing, and tree felling. It restores engine compression and factory power output on worn or scored powerheads.
The cylinder is cast from high-silicon aluminum alloy featuring deep, multi-tiered cooling fins to maximize airflow over the combustion chamber during sustained heavy cutting. The cylinder bore is finished with hard chrome plating to provide wear resistance, reduce piston ring friction, and prevent bore scoring under high combustion temperatures up to 200°C. CNC-machined intake, exhaust, and dual transfer ports ensure uniform scavenging and clean fuel-air mixture flow across the entire RPM range.
Supplied as a complete, pre-matched top-end overhaul package, the kit includes the cylinder body, heat-treated aluminum piston, two compression rings, a ground wrist pin, and retaining circlips.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product | 6200 Chain Saw Cylinder Assembly |
| SKU | 0118206 |
| Brand | SeaSummer |
| Displacement | 62.0 cc (2-Stroke, Air-Cooled) |
| Standard Bore | Φ 47.5 mm / Φ 48.0 mm |
| Bore Coating | Hard Chrome Plated (HV 850–1000) |
| Cylinder Material | High-Silicon Aluminum Alloy Cast |
| Piston Material | Heat-Treated Aluminum Alloy |
| Mounting Hardware | 4-Bolt M5 Base Flange Pattern |
| Engine Compatibility | 62cc 2-Stroke Chainsaws (Zenoah G6200, G621, Universal 6200) |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Pre-Assembly Inspection
Check the cylinder bore surface with a dial bore gauge for roundness. Verify that the ring end gaps seat properly over the piston locating pins before fitting the assembly.

Mounting Steps
Install the wrist pin and needle bearing through the connecting rod, securing both sides with circlips (ensure circlip gaps point downward).
Orient the piston so the arrow stamped on the piston crown points toward the exhaust port.
Fit a new cylinder base gasket over the crankcase studs and coat the cylinder bore with fresh 2-stroke oil.
Compress the two piston rings and slide the cylinder block smoothly over the piston skirt.
Tighten the four M5 base bolts diagonally to 7.5–9.0 N·m.

Break-in Procedure
Run the first 2–3 fuel tanks with a 20:1 to 25:1 high-grade 2-stroke oil mix. Avoid running the engine at sustained wide-open throttle with no cutting load during initial break-in.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:What is included in this 6200 cylinder assembly kit?
A: The kit includes the complete chrome-plated cylinder body, matched piston, two piston rings, wrist pin, and two wrist pin retaining circlips.
Q: Which chainsaw models does this 6200 cylinder fit?
A:It fits 62cc 2-stroke chainsaws based on the Komatsu Zenoah G6200 / G621 platform, as well as generic 6200 chainsaws using 47.5 mm or 48.0 mm base mount configurations.
Q: What is the correct piston installation direction?
A:The arrow on the top of the piston crown must always point toward the exhaust port (front of the chainsaw).
Q: What are the bulk export packaging and shipping terms?
A:Each cylinder set is sealed in rust-preventative packaging and individually boxed inside master export Cardboard packaging. Standard production lead time is 30 Days.
Hot Tags: 6200 chain saw cylinder assy, China 6200 chain saw cylinder assy suppliers, 2500 3800 parts, 2500 Buffer Set 3pcs, 2500 Chain Saw Fuel Hose, 2500 Chainsaw Fuel Hose, 3800 Double Easy Starter, 3800 Oil Pump

