Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of chain saw worm gear in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
Chainsaw Oil Pump Drive Worm Gear
POM Helical Worm Gear for 45cc–58cc 2-Stroke Chainsaw Oil Pumps

Product Introduction
This oil pump drive worm gear fits 4500, 5200, and 5800 series (45cc to 58cc) two-stroke gasoline chainsaws. Located on the crankshaft journal between the crankcase oil seal and the clutch drum, it translates crankshaft rotation into mechanical drive for the automatic oil pump pinion.
The gear is precision-molded from wear-resistant polyoxymethylene (POM / Acetal) polymer, providing self-lubricating characteristics and resistance to swelling in hot engine oil and fuel mixtures. As the clutch drum rotates during throttle application, the worm's helical thread continuously drives the oil pump plunger shaft to feed chain oil to the guide bar rails. At idle, the worm stops rotating, cutting off oil delivery to prevent dripping.
The internal bore features an integrated rubber sealing ring to prevent sawdust and abrasive grit from migrating between the worm sleeve and the crankshaft journal.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product | Chain Saw Worm Gear |
| SKU | 0118040 |
| Brand | SeaSummer |
| Cross Reference | Husqvarna 503 89 22-02 / 503557501, Stihl 1128 640 7112 |
| Drive Mechanism | Helical Worm and Pinion Transmission |
| Gear Material | High-Crystallinity POM Engineering Polymer |
| Thread Direction | Right-Hand Precision Molded Helical Profile |
| Operating Temperature | -20°C to +110°C Continuous Oil Temp |
| Mounting Location | Crankshaft Snout (Behind Clutch Drum) |
| Engine Compatibility | 45cc–58cc 2-Stroke Chainsaws (4500, 5200, 5800 Platforms) |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Pre-Assembly Inspection
Check the helical gear teeth for clean molding lines and sharp definition. Inspect the inner bore and rubber sealing collar for proper circular shape without distortion.

Mounting Steps
Remove the clutch drum and needle bearing from the crankshaft.
Clean sawdust, chips, and old grease out of the oil pump drive chamber.
Apply a light film of clean engine oil onto the crankshaft journal and worm teeth.
Slide the worm gear over the crankshaft snout, pressing it inward until its teeth mesh fully with the metal oil pump pinion.
Reinstall the clutch needle bearing, clutch drum, and centrifugal clutch assembly.

Lubrication Check
Start the engine, run at half throttle, and check the guide bar nose over a clean surface. A steady oil spray should appear within 5 seconds.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:What causes an oil pump worm gear to strip its teeth?
A: Worm teeth stripping is usually caused by wood chips packing into the pump cavity, running thick or contaminated bar oil, or a seized oil pump plunger locking the pinion.
Q: Which chainsaw models use this worm gear?
A:It fits standard 45cc, 52cc, and 58cc two-stroke chainsaws (4500, 5200, 5800 models), as well as compatible Husqvarna, Stihl, Jonsered, and universal import chainsaws.
Q: Should I replace the worm gear when installing a new oil pump?
A:Yes. Replacing the worm gear alongside a new oil pump ensures clean tooth engagement and prevents old, partially worn plastic threads from slipping under heavy cutting load.
Q: What are the bulk export packaging details and delivery terms?
A:Worm gears are packed in bulk polybags, boxed in workshop quantities, and packed into master export Cardboard packaging. Standard production lead time is 30 Days.
Hot Tags: chain saw worm gear, China chain saw worm gear suppliers, 5800 Oil Sump, 4500 5200 5800 parts, 5200 5800 Clutch Remover Tools, 4500 5200 Fuel Hose

