Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of hus272 guide bar cover in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
Husqvarna 272 / 268 / 61 Chainsaw Clutch Cover & Chain Brake Assembly
Heavy-Duty Guide Bar Side Cover with Inertia Chain Brake (503 73 66-01)

Product Introduction
This complete clutch cover and chain brake assembly mounts over the drive sprocket and guide bar on classic Husqvarna professional chainsaws, including the 61, 268, and 272XP series. It securely clamps the guide bar against the engine crankcase, protects the operator from rotating clutch components, and provides emergency kickback chain braking.
The assembly is built around a die-cast alloy housing fitted with a factory-assembled chain brake mechanism. A spring-steel brake band wraps around the clutch drum, actuated by an impact-resistant front hand guard lever and an internal heavy-duty spring. An integrated chain tensioner screw and brass drive gear allow smooth, precise chain tension adjustments without removing the cover.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Chainsaw Guide Bar Clutch Cover & Chain Brake Assembly |
| SKU | 0110021 |
| Brand | SeaSummer |
| OEM Cross Ref | 503 73 66-01 / 503 70 46-01 / 503 57 29 / 503 58 06-01 |
| Compatible Models | Husqvarna 61, 66, 266, 268, 268XP, 272, 272XP, 268K |
| Housing Material | High-Strength Die-Cast Magnesium / Aluminum Alloy |
| Brake Band Material | Heat-Treated High-Carbon Spring Steel |
| Hand Guard Material | Impact-Resistant Engineering Polymer |
| Tensioner Type | Front-Access / Side-Access Worm-Drive Tensioner Pin |
| Bar Mount Pattern | Standard Large Husqvarna Dual-Stud Pattern (M8 / M10) |
| Function | Guide Bar Clamping, Chip Ejection & Inertia Safety Braking |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Pre-Installation Safety Check
Always pull the front hand guard back toward the handle to release the chain brake (UNLOCKED / OFF position) before attempting to install or remove the cover. Fitting the cover while the brake band is tripped will bind against the clutch drum and distort the spring steel band.

Assembly Steps
Clean all woodchips and oil sludge from the crankcase bar pad and clutch drum surface.
Align the guide bar over the two crankcase studs and loop the saw chain around the drive rim sprocket and bar rails.
Align the tensioner adjuster pin on the cover with the matching locating hole in the guide bar tail.
Position the cover over the studs and thread the two bar flange nuts finger-tight.
Turn the chain tensioner screw clockwise until the chain snug-fits the lower bar rail without sagging.
Lift the guide bar nose and torque both bar nuts securely to 25–30 N·m.

Maintenance & Safety Inspection
Regularly clean accumulated wood dust from inside the brake mechanism chamber. Replace the entire assembly if the alloy housing develops hairline cracks around the bar stud recesses or if the brake band shows severe heat discoloration and wear.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:Will this clutch cover fit both the Husqvarna 61 and 272XP?
A: Yes. Husqvarna 61, 266, 268, and 272XP models share identical crankcase bar pads, drive sprocket positions, and dual bar stud spacing.
Q:Does this assembly arrive fully assembled with the brake spring and hand guard?
A:Yes. The unit comes complete and pre-tensioned with the internal spring, toggle linkage, brake band, hand guard flag, and chain tensioner assembly installed and tested.
Q: What causes the brake band to drag or heat up?
A:Running the chainsaw with the hand guard locked in the engaged position, or installing the cover without fully resetting the brake spring mechanism into the open position.
Q: What is the standard packaging and lead time?
A:Packed individually in shock-absorbing inner boxes within master Cardboard packaging. Standard production delivery time is 30 Days.
Hot Tags: hus272 guide bar cover, China hus272 guide bar cover suppliers, HUS61 Clutch Dum Sets, HUS272 Guide Bar Cover, HUS61 HUS268 HUS272 Chain Saw Trigger Sets 5pcs, HUS61 HUS268 HUS272 Trigger Sets 5pcs, hs61 hs272 hs268 parts


