Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of ms210/ms250 china saw starter pulley sets in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
STIHL MS210 / MS250 Chainsaw Recoil Starter Pulley & Pawl Kit
Complete Manual Starter Rope Rotor, Dogs & Torsion Spring Rebuild Set (1123 195 0400)

Product Introduction
This recoil starter overhaul kit replaces cracked rope rotors, rounded engagement pawls, and fatigued guide springs inside STIHL compact and mid-range chainsaw pull starters. It repairs rope retraction failure, starter slippage against the flywheel, and jamming without requiring a complete starter housing replacement.
The starter pulley is injection molded from reinforced high-toughness polymer (POM / PA66 composite) featuring a deep-U rope guide channel that prevents pull cord overlap and jamming. The twin starter pawls are stamped from high-strength alloy steel and heat-treated to resist rounding under repeated compression pulses. Under rope tension, the centrifugal pawls swing out instantly to lock into the flywheel starter cup, then retract cleanly when the engine fires.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Chainsaw Recoil Starter Pulley & Pawl Rebuild Kit |
| SKU | 0105034 |
| Brand | SeaSummer |
| OEM Cross Ref | 1123 195 0400 (Pulley) / 1125 195 7200 (Pawl) / 1118 195 3500 (Spring) |
| Starter Assembly Ref | 1123 080 1802 / 1123 080 2104 / 1123 080 2115 |
| Compatible Models | STIHL 017, 018, 021, 023, 025, MS170, MS180, MS190, MS192, MS210, MS230, MS250, MS211, MS260 |
| Rotor Material | High-Toughness Wear-Resistant Engineering Polymer (POM / PA66) |
| Pawl & Spring Material | Heat-Treated High-Carbon Alloy Steel / Spring Steel |
| Thermal Resistance | -20°C to +80°C Operating Range |
| Durability Rating | Tested for 20,000+ Manual Pull Cycles |
| Included Components | Starter Rope Pulley, 2× Pawl Dogs, Torsion Return Spring, Thrust Washer, E-Clip |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Pre-Mounting Inspection
Check the pulley center bore and rope channel for molding burrs. Verify that both pawls pivot freely on their locating pins without binding.

Assembly & Pre-Tensioning Steps
Remove the four starter housing screws from the chainsaw crankcase.
Clean all packed sawdust and woodchips out of the recoil housing chamber.
Thread the starter rope through the housing bushing and tie a secure figure-eight knot in the pulley rope pocket.
Wind the rope counter-clockwise into the pulley groove, leaving approximately 20 cm exposed.
Place the pulley over the housing center post, engaging the rewind spring inner loop into the pulley slot.
Install the pawls, torsion wire spring, thrust washer, and lock the E-clip onto the center post.
Pull the rope out slightly, hold the pulley, and wind the rope loop 2–3 full turns clockwise to set rewind pre-tension before releasing.

Maintenance Practice
Apply a light smear of silicone or low-viscosity lithium grease to the center post and pawl pivot bosses. Avoid heavy automotive grease or engine oil, which attract fine sawdust and cause pawls to stick in cold weather.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:Why does the starter rope pull freely without turning the engine over?
A: Worn or rounded pawl tips, a bent pawl guide spring, or sawdust buildup in the pivot mechanism prevent the pawls from expanding outward into the flywheel tabs.
Q: Is this kit compatible with both MS180 and MS250 chainsaws?
A:Yes. STIHL uses this standard pulley and pawl geometry across the entire 1123 series (017, 018, 021, 023, 025, MS170, MS180, MS210, MS230, MS250).
Q: How do I adjust the recoil spring tension after installing the new pulley?
A:After fitting the pulley and clipping the pawls, pull out a loop of rope through the housing notch and rotate the pulley clockwise 2 to 3 turns to add recoil spring pre-tension.
Q: What are the bulk export packaging details and delivery lead time?
A:Each kit is packed in a sealed polybag inside master Cardboard packaging. Standard production lead time is 30 Days.
Hot Tags: ms210/ms250 china saw starter pulley sets, China ms210/ms250 china saw starter pulley sets suppliers, MS210 MS250 China Saw Starter Pulley Sets, MS210 MS250 Chain Saw Fuel Tank Washer, MS210 MS230 MS250 Clutch Drum Set, MS180 STL Chain 50dl 25 Tooth 1 1mm 3 8 Guide Bar, MS170 MS171 MS180 Chain Saw Nut, STL MS210 230 250 021 023 025 Ignition Coil

