Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of ms250 cylinder assy 42.5mm in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
STIHL MS250 / 025 42.5mm Cylinder Piston Assembly
45.4cc Engine Rebuild Kit with Cylinder Block, Piston Kit & Engine Pan (1123 020 1209)

Product Introduction
This 42.5mm cylinder and piston overhaul assembly restores full factory compression, power output, and idling stability on STIHL MS250 and 025 chainsaws. Engineered for standard 45.4cc engine rebuilds or performance displacement upgrades from MS230/023 units, this kit replaces scored cylinders and seized pistons caused by lean fuel mixtures, air leaks, or lubrication failure.
The die-cast aluminum cylinder features precision-machined transfer ports, extensive heat dissipation fins, and an electroplated wear-resistant hard coating on the bore wall. The matching hypereutectic aluminum-silicon alloy piston is supplied with two high-elasticity alloy cast iron piston rings, a 10mm hardened wrist pin, and retaining circlips to deliver a tight gas seal and extended service life under continuous heavy felling and bucking loads.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Chainsaw 42.5mm Cylinder Piston Assembly Kit |
| SKU | 0105032 |
| Brand | SeaSummer |
| Cylinder OEM Cross Ref | 1123 020 1209 / 1123 020 1206 / 1123 020 1220 |
| Piston Kit OEM Cross Ref | 1123 030 0408 |
| Compatible Chainsaws | STIHL MS250, MS250C, 025, MS230, MS230C, 023 |
| Cylinder Bore Diameter | Φ 42.5 mm (Roundness & Cylindricity ≤ 0.008 mm) |
| Cylinder Material | High Thermal Conductivity Die-Cast Aluminum Alloy |
| Bore Surface Treatment | Precision Hard Plating / Nickel-Composite Coating (HV ≥ 800) |
| Piston Material | High-Strength Hypereutectic Aluminum-Silicon Alloy |
| Piston Ring Specification | 2 × High-Elasticity Alloy Cast Iron Rings (Parkerized) |
| Piston Pin Diameter | Φ 10 mm Hardened Steel Wrist Pin with 2 C-Clips |
| Engine Architecture | Clamshell Design (Mates directly to Crankcase Engine Pan) |
| Total Kit Weight | Approx. 1.00 kg – 1.25 kg |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Pre-Assembly Inspection
Check the cylinder bore under direct light for complete plating coverage and absence of pinholes. Measure piston ring end gap inside the cylinder bore (recommended 0.15 mm to 0.30 mm).

Installation Guidelines
Install the piston onto the connecting rod using the 10mm wrist pin, ensuring the arrow on the piston crown points toward the exhaust port. Secure both circlips in their grooves.
Align the piston ring end gaps with the brass locator pins in the piston ring grooves.
Lubricate the cylinder bore, piston skirt, and crankshaft bearings with clean two-stroke engine oil.
Compress the rings using a piston ring compressor or thumb pressure and slide the cylinder down over the piston.
Apply a uniform, thin bead of high-temperature fuel-resistant engine sealant along the crankcase engine pan mating perimeter (MS250 uses a gasketless clamshell joint).
Torque the four engine pan bolts in a diagonal criss-cross pattern.

Break-In & Operational Maintenance
For the first 2 to 3 tanks of fuel, run the chainsaw with a high-quality 25:1 two-stroke fuel-to-oil mixture. Avoid prolonged full-throttle free-spinning without cutting load to allow rings and cylinder walls to seat evenly.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:Can this 42.5mm kit be used to upgrade a 40mm MS230 or 023 chainsaw?
A: Yes. The MS230/023 and MS250/025 share the identical clamshell crankcase footprint and stroke, making this 42.5mm kit a direct bolt-on upgrade to increase displacement to 45.4cc.
Q: Does this cylinder block include a decompression valve port?
A:Both solid standard versions and threaded decompression port versions (OEM 1123 020 1220 for MS250C) are available depending on engine configuration requirements.
Q: Why is liquid sealant required instead of a base gasket?
A:STIHL MS250 engines utilize a clamshell design where the bottom engine pan seals directly against the cylinder skirt to support the crankshaft bearings and oil seals. A specialized anaerobic or high-temp silicone sealant must be used to prevent crankcase vacuum leaks.
Q: What is the standard export packing and lead time?
A:Individual protective boxed sets packed in heavy-duty master Cardboard packaging. Standard production lead time is 30 Days.
Hot Tags: ms250 cylinder assy 42.5mm, China ms250 cylinder assy 42.5mm suppliers, MS210 MS230 MS250 Chain Saw Clutch Drum Set, MS250 Chain Saw Adjusting Screw, MS250 Chain Saw Choke Rod, MS250 K20 WAT Carburetor Repair Kit, MS023 MS025 MS230 MS250Cylinder Assy 42 5mm Spark Plug Crankshaft Cylinder Head Seat Screw, MS250 Cylinder Assy 42 5mm

