Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of ms382 fuel hose in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
STIHL MS382 / MS381 Fuel Hose Line
Molded Fuel Suction Line with Integrated Tank Sealing Grommet (1119 358 7702)

Product Introduction
This molded fuel suction hose replaces brittle, cracked, hardened, or leaking fuel lines on STIHL MS382, MS381, MS380, and 038 chainsaws. Routing directly from the bottom of the fuel tank to the carburetor inlet nipple, it eliminates fuel sweating around the tank opening, prevents air bubble ingestion during acceleration, and ensures steady fuel flow.
Formulated from fuel-resistant NBR/FKM rubber elastomer, the line withstands ethanol-blended gasoline (E10/E15/E20) and synthetic two-stroke premix oils across -30°C to +120°C without swelling or collapsing. An integrated stepped sealing grommet collar presses directly into the fuel tank wall for a liquid-tight seal without sealants, while the flexible in-tank section allows the weighted fuel filter to follow fuel levels at all cutting angles.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Chainsaw Fuel Suction Hose with Sealing Grommet |
| SKU | 0101108 |
| Brand | SeaSummer |
| OEM Cross Ref | 1119 358 7702 / 0000 930 2803 |
| Compatible Chainsaws | STIHL MS382, MS381, MS380, 038, MS440, MS460, MS660 |
| Hose Inner Diameter (ID) | Φ 3.1 mm (Tight Push-Fit over Carburetor & Filter Barbs) |
| Hose Outer Diameter (OD) | Φ 5.7 mm (1.3 mm Collapse-Resistant Wall Thickness) |
| Tank Seal Construction | Integrated Molded Stepped Grommet Flange (Press-Fit) |
| Rubber Material | High-Grade Fuel-Resistant NBR / FKM Synthetic Elastomer |
| Operating Temperature | -30°C to +120°C (Cold-Crack & Engine Heat Resistant) |
| Fuel Compatibility | Standard Petrol, Ethanol Blends (E10/E15/E20), 2T Premix Oils |
| Flexibility Profile | Full Multi-Directional Flex Section for Submerged Fuel Pickup |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Pre-Assembly Inspection
Inspect the hose body for uniform wall thickness and check that the molded sealing grommet ridge is free of parting line flash or mold defects that could compromise tank sealing.

Installation Guidelines
Drain the fuel tank and remove the air filter shroud and carburetor assembly.
Carefully pull out the old hardened fuel line and in-tank fuel filter.
Thread a flexible guide wire or bent wire hook through the fuel tank bore, hook the new hose, and pull it into the tank.
Apply a drop of two-stroke oil to the grommet collar and seat it firmly into the tank wall aperture until the retaining lip clicks fully into place.
Attach the weighted fuel filter inside the tank and push the external hose end onto the carburetor fuel inlet barb.

Operating & Maintenance Practices
Check fuel lines during seasonal overhauls. If the rubber feels stiff or shows fine surface crazing, replace the line promptly to prevent air in-leakage that causes dangerous lean running conditions.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:What are the primary symptoms of a failing fuel line on an MS382?
A: Fuel pooling around the carburetor box, hard starting after sitting, engine dying when tilted sideways (fuel filter not submerged), or engine bogging under high-throttle load due to microscopic pinhole air leaks.
Q: Does this hose require additional sealant around the fuel tank hole?
A:No. The integrated stepped rubber grommet is precision-sized to compress against the fuel tank wall, providing an airtight, leak-proof seal without messy liquid adhesives.
Q: Is this fuel line resistant to modern ethanol fuels?
A:Yes. The NBR/FKM compound is engineered to resist degradation, hardening, and volume swelling caused by modern alcohol-oxygenated fuels.
Q: What is the standard order lead time and packaging?
A:Supplied in bulk packs or individual branded bags inside export Cardboard packaging. Standard production delivery time is 30 Days.
Hot Tags: ms382 fuel hose, China ms382 fuel hose suppliers, ms382 parts, MS382 Cylinder Kit Close 52mm 1 2, MS382 Fuel Hose, MS382 Clutch Drum Set 5PCS


