Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of chain saw piston neddle cage in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
STIHL MS651 / MS660 / 066 Piston Pin Needle Bearing Cage
12×17×13mm Connecting Rod Small-End Needle Roller Assembly (OEM 9512 003 3062)

Product Introduction
This small-end connecting rod needle cage bearing supports the wrist pin on high-displacement STIHL 064, 066, MS651, MS660, and MS661 chainsaws. In 90cc+ professional felling engines, reciprocating piston inertia and high-frequency combustion shock generate extreme alternating loads at the top end of the connecting rod.
The assembly utilizes a stamped carbon steel cage coated with a low-friction bronze/copper surface layer, housing a set of high-carbon chromium steel (GCr15) cylindrical needle rollers. Ground to tight micron tolerances and heat-treated to HRC 60–64, the rollers maintain accurate axial guidance and free rotation at engine speeds up to 14,000 RPM while resisting thermal softening in combustion zone temperatures above 180°C.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Small-End Piston Wrist Pin Needle Roller Bearing |
| SKU | 0102307 |
| Brand | SeaSummer |
| Primary OEM Ref | 9512 003 3062 (12×17×13 mm) |
| Applicable Engine Platforms | STIHL 064, 066, MS651, MS660, MS661, MS661C-M |
| Nominal Dimensions | 12 mm ID × 17 mm OD × 13 mm Width (Fits Φ 12 mm Wrist Pin & Φ 17 mm Con-Rod Eye) |
| Series Size Options | 10×13×12.5 (MS260) | 10×16×12 (MS500i) | 11×14×15 (MS361) | 12×15×15 (MS382) |
| Roller Material & Hardness | GCr15 / 100Cr6 High-Carbon Bearing Steel (Quenched HRC 60 ~ 64) |
| Cage Construction | One-Piece Stamped Steel Cage with Anti-Galling Bronze / Copper Plating |
| Dynamic Speed Rating | Rated to 14,000 RPM Operating Speed |
| Thermal Operating Limit | Stable at Continuous Operating Temperatures ≥ 180°C |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Pre-Assembly Inspection
Inspect the cage pockets to verify all needle rollers spin freely without binding. Measure the inside diameter over the rollers with a pin gauge to confirm correct clearance over the Φ 12.0 mm wrist pin.

Installation Guidelines
Clean the connecting rod eye and check for micro-galling or bore out-of-roundness.
Fully saturate the new needle bearing in clean 2-stroke engine oil before sliding it into the rod small end.
Align the piston pin bore with the connecting rod, slide the wrist pin through the lubricated bearing, and install fresh circlips into the piston grooves.
Verify smooth rocking articulation of the piston on the connecting rod with zero axial pinching.

Service Life & Replacement Rules
Always install a brand-new wrist pin needle cage whenever fitting a replacement cylinder or piston kit. A worn needle bearing with microscopic surface fatigue will rapidly accelerate pin wear and risk roller cage failure under full-throttle bucking loads.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:Why is it unsafe to reuse an old wrist pin needle bearing with a new piston?
A: Reusing a needle bearing that has undergone millions of load cycles introduces micro-spalling and uneven roller wear to the new wrist pin, leading to rapid play, piston slap, and eventual needle cage collapse.
Q:What function does the bronze/copper plating on the steel cage serve?
A:The sacrificial copper-based coating provides dry-lubricity during cold startups and prevents metal-to-metal galling between the cage, connecting rod eye, and piston bosses under lean fuel conditions.
Q: Does this bearing fit smaller STIHL saws such as the MS361 or MS382?
A:No. The 12×17×13 mm size is specific to 12 mm wrist pins with 17 mm rod eyes (066/MS660 series). The MS361 uses an 11×14×15 mm bearing, while the MS382 uses 12×15×15 mm.
Q: What is the standard export packaging and lead time?
A:Supplied in individual anti-rust oil-treated packaging within master Cardboard packaging. Standard production delivery time is 30 Days.
Hot Tags: chain saw piston neddle cage, China chain saw piston neddle cage suppliers, ms651 parts

