Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of chain saw p350/p351 starter pulley set in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
Partner P350 / P351 Recoil Starter Pulley & Pawl Set
Starter Rotor, Centrifugal Pawl, Spring & Rope Rebuild Kit for 35cc–51cc Chainsaws

Product Introduction
When small-to-mid displacement forestry chainsaws suffer from slack starter cords that refuse to rewind or slipping pull handles that fail to turn the flywheel, worn starter rotor teeth and broken rewind springs are the primary culprits. Repeated hard pulling and sawdust buildup cause standard plastic pulley ears to round off and jam inside the fan cover.
This complete starter rebuild kit provides every component necessary to overhaul the recoil starter on Partner P350/P351, Dolmar PS-350/PS-351, Makita EA4300, and McCulloch 335–440 chainsaws. Molded from wear-resistant, self-lubricating PA66/POM polymer, the rope rotor features reinforced cam drive lugs and a deep guide channel to prevent cord pinching. Paired with hardened alloy steel centrifugal pawls, an isothermally quenched carbon spring steel coil, and a high-tenacity braided nylon pull cord with a rubberized grip, it restores immediate flywheel bite and smooth recoil action.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Chainsaw Recoil Starter Pulley & Pawl Rebuild Kit |
| SKU | 0116018 |
| Brand | SeaSummer |
| Partner OEM Part Number | 503-431901 |
| Dolmar / Makita OEM Ref | 195-160-020 |
| McCulloch OEM Part Number | 530053728 |
| Compatible Chainsaws | Partner P350, P351; Dolmar PS-350, PS-351; Makita EA4300; McCulloch 335, 338, 435, 440 |
| Complete Assembly Weight | Approx. 260 g (9.2 oz) |
| Starter Pulley Material | Impact-Modified, Wear-Resistant Engineering Nylon (PA66 / POM Composite) |
| Centrifugal Pawl Material | High-Strength Stamped & Quenched Alloy Steel Pawls |
| Rewind Spring Construction | Precision Quenched & Tempered Carbon Spring Steel Coil |
| Pull Cord Specification | Multi-Strand Braided High-Tenacity Abrasion-Resistant Nylon Rope |
| Operating Temperature | -30°C to +90°C (Cold-Weather Crack Resistant & Crankcase Heat Stable) |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Bench Check Before Assembly
Check the pulley center bore for burr-free rotation and confirm that the centrifugal pawls pivot smoothly on their mounting posts without sticking. Clean out all wood shavings and dried bar oil from the starter housing cavity.

Step-by-Step Installation & Spring Pre-Tensioning
Apply a light film of low-temperature grease to the housing center pivot post.
Seat the coiled rewind spring into the housing recess, ensuring the outer spring loop hooks securely into the anchor slot.
Thread the pull cord through the housing eyelet and tie a firm figure-eight knot in the pulley pocket.
Place the pulley over the pivot post, engaging the inner spring hook.
Spring Pre-Tensioning: Wind the rope into the pulley groove, pull out a loop of slack, and rotate the pulley clockwise 1.5 to 2 full turns to establish return spring tension before letting the handle retract flush.
Mount the centrifugal pawls, washer, and center retaining screw.

Operating Advice & Pull Technique
Always pull the starter grip out smoothly until the internal pawls engage the flywheel cup before executing a brisk, continuous pull. Never allow the handle to snap back uncontrolled against the shroud from full extension.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:What are the primary symptoms indicating that this starter kit needs replacement?
A: The starter cord hangs loose and will not retract (broken rewind spring), the handle pulls freely without turning the engine over (rounded or missing starter pawls), or the cord binds inside the housing (cracked pulley flange).
Q: Can this kit be used on Dolmar and Makita chainsaws?
A:Yes. Dolmar PS-350/PS-351, Makita EA4300, Partner P350/P351, and McCulloch 335–440 share the same platform starter housing geometry and center post dimensions.
Q: How do I make sure the spring is not over-tightened during assembly?
A:After pre-tensioning 1.5 to 2 turns, pull the starter rope out to its full extension. You should still be able to rotate the pulley manually at least a half-turn further before the spring coils bottom out solid.
Q: What is the standard packaging and lead time?
A:Each overhaul set is packaged in an individual labeled box or protective polybag within master export Cardboard packaging. Standard production lead time is 30 Days.
Hot Tags: chain saw p350/p351 starter pulley set, China chain saw p350/p351 starter pulley set suppliers, P350 P351 Chain Saw Starter Pulley Set

