Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of ts420 gasket in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
STIHL TS410 / TS420 Complete Engine Gasket Set
Full Engine Overhaul Gasket & Oil Seal Service Kit (SKU 0120018)

Product Introduction
Heavy concrete, asphalt, and masonry cutting subjects cut-off saw engines to severe thermal cycling, continuous high-frequency vibration at 9,000+ RPM, and abrasive dust exposure. On STIHL TS410 and TS420 power cutters, aged or heat-hardened engine gaskets frequently blow out, leading to crankcase air leaks, erratic idle hunting, loss of fuel pump pulse pressure, and fatal lean piston seizures.
This complete engine gasket and oil seal overhaul set provides an all-in-one sealing solution for major engine rebuilds. Precision die-cut from oil-resistant, high-recovery non-asbestos composite material, the cylinder base and crankcase gaskets conform tightly to cast aluminum mating surfaces to maintain crankcase vacuum and primary compression. Accompanied by a heat-shielded exhaust muffler gasket and dual garter-spring crankshaft skeleton oil seals, it ensures complete airtightness across the entire engine block.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Cut-Off Saw Complete Engine Gasket & Seal Kit |
| SKU | 0120018 |
| Brand | SeaSummer |
| OEM Cross Reference | Direct-Fit Aftermarket Equivalent for STIHL TS410 / TS420 Engine Gasket Set |
| Compatible Cut-Off Saws | STIHL TS410, TS420 (66.7cc Concrete & Metal Power Cutters) |
| Included Sealing Components | Cylinder Base Gasket, Crankcase Split Gasket, Exhaust Gasket, Dual Oil Seals |
| Base & Crankcase Material | High-Recovery Oil-Resistant Non-Asbestos Fiber Composite Sheet |
| Exhaust Gasket Material | High-Temperature Reinforced Metal / Graphite Composite Sheet |
| Oil Seal Construction | Dual Skeleton Oil Seals with Internal Garter Springs |
| Airtightness Benchmark | Holds -0.5 bar Vacuum & +0.5 bar Pressure Decay Test (20s Hold) |
| Temperature Operating Range | -30°C to +200°C (Resistant to Exhaust Flange Heat & Cold Weather) |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Pre-Assembly Inspection
Check all gasket bolt holes, transfer port cutouts, and sealing edges for clean die-cutting without tears or creases. Ensure the crankshaft oil seal lips are soft, flexible, and have their internal garter springs properly seated.

Assembly Guidelines & Mandatory Replacement Rule
Scrape away all old gasket residue and degrease the crankcase split face, cylinder base pad, and muffler flange thoroughly.
Mandatory Rule: Never reuse old, compressed cylinder base gaskets during top-end overhauls; crushed gaskets will not reseal and will cause destructive air leaks.
Install the crankcase split gasket dry between the case halves and torque case bolts diagonally.
Position the new cylinder base gasket over the crankcase studs without liquid sealant.
Coat oil seal lips with clean 2-stroke oil and press-fit squarely into the crankcase pockets.
Mount the cylinder block and torque the four cylinder base screws in an alternating cross pattern to factory specifications.

Leak-Down Quality Check
Always conduct a crankcase pressure (+0.5 bar) and vacuum (-0.5 bar) leak-down test after reassembly. A properly sealed engine guarantees strong carburetor fuel pump pulse action and prevents lean fuel mixtures during heavy cutting load.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:What are the primary symptoms of a blown cylinder base gasket on a TS420?
A:Difficulty starting, erratic high-speed idle that will not return to normal, oil and fuel weeping around the cylinder base, and severe piston scoring due to unmetered air entering the crankcase.
Q: Should liquid gasket maker or RTV silicone be used with these gaskets?
A:No. High-recovery composite gaskets are engineered to be installed clean and dry. Applying excess RTV silicone can squeeze into the crankcase transfer passages and block the carburetor impulse hole.
Q: Does this kit include both crankshaft oil seals?
A:Yes. This comprehensive overhaul kit includes the complete gasket set along with both the flywheel-side and clutch-side crankshaft skeleton oil seals.
Q: What is the standard packaging and lead time?
A:Each gasket set is sealed flat in a protective polybag with backing card inside master export Cardboard packaging. Standard production delivery time is 30 Days.
Hot Tags: ts420 gasket, China ts420 gasket suppliers, TS420 Crankshaft, TS420 Starter Pulley, TS420 Starter Pawl Sets 3pcs, TS420 Gasket, TS420 Piston Needle 10X14X13, TS420 Oil Seal 15X24X7 13 9X26 2X6 8

