Cultivator Blade For 1E48F 63CC

Cultivator Blade For 1E48F 63CC

SKU: 4301020
Engine & Machinery Fitment: 1E48F / 48F (63cc / 63.3cc) Powered Mini Cultivators, Handheld Garden Tillers, Ditching Machines
Tillage Capabilities: Working Width: 20–50 cm (Adjustable) | Working Depth: 10–40 cm
Blade Metallurgy & Hardness: Forged 65Mn High-Manganese Steel, Quenched & Tempered, Cutting Edge HRC 48–55
Commercial Terms: Brand: SeaSummer | Delivery Time: 30 Days | Packaging: Cardboard packaging
Send Inquiry
Add To Inquiry
Description

Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of cultivator blade for 1e48f 63cc in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.

 

Product Overview & Operating Details

1E48F 63cc Mini Cultivator & Rotary Tiller Blade Set

Heavy-Duty 65Mn Manganese Steel Curved Rotary Tines for Soil Preparation & Weeding

 
 
product-1024-1024

Product Introduction

Tilling hardened clay, uncultivated virgin soil, and dense weed patches places severe twisting and impact loads on cultivator blade assemblies. Standard stamped carbon steel tines quickly bend, dull, or snap upon striking hidden stones and tree roots, resulting in shallow tillage depth, severe machine vibration, and excessive gearbox strain.

This heavy-duty rotary tiller blade set is engineered specifically for 1E48F 63cc small engine gear-drive cultivators. Manufactured from premium 65Mn high-manganese spring steel and subjected to full-body quenching with precision temper heat treatment, each tine achieves an edge hardness of HRC 48–55 while retaining a high-toughness ductile core that absorbs rock strikes without brittle fracturing. The involute curved geometry provides an aggressive progressive soil slicing angle that minimizes root tangling and sticky soil buildup.

 

 

 

Technical Specifications

 

 

Parameter Specification
Product Name Cultivator Rotary Tine Blades Set
SKU 4301020
Brand SeaSummer
Compatible Engine Model 1E48F / 48F Single-Cylinder Air-Cooled 2-Stroke (63cc / 63.3cc)
Applicable Machinery Mini Cultivators, Soil Tillers, Ditching & Trenching Machines, Orchard Management Units
Configuration 4-Piece Tine Set (Left & Right Alternating Curved Rotary Tines with Hex Hub)
Tillage Working Width 20 to 50 cm (Adjustable Gang Layout)
Tillage Working Depth 10 to 40 cm (100–400 mm Soil Penetration)
Blade Geometry Involute Self-Cleaning Curved Profile (Anti-Weed Entanglement)
Blade Material Forged 65Mn Wear-Resistant Manganese Spring Steel
Heat Treatment & Hardness Overall Quenching + Intermediate Tempering / Cutting Edge HRC 48–55
Drive Shaft Interface Standard Hex / Round Axle Hub with Cross-Pin Bolt Locking Pattern
Delivery Time 30 Days
Packaging Cardboard packaging

 

Products Application

 

 

product-816-816

Blade Hardness & Bore Symmetry Inspection

Inspect the mounting hub internal dimensions and bolt holes to ensure concentric alignment with your tiller axle. Check blade bevel edges for uniform factory grind and verify that left-hand and right-hand curved tines are matched symmetrically to prevent rotational imbalance.

product-816-816

Installation & Fastening Protocol

Shut down the engine and clean all dried mud and compacted roots from the cultivator output drive shaft.

Slide the left and right rotary blade hubs onto the axle, ensuring the curved cutting edges face forward in the direction of working rotation.

Align the locking pin through-holes, insert high-tensile grade retaining bolts, and fit spring lock washers before torquing the locknuts securely.

Balancing Rule: Always install matching pairs on both sides of the gearbox. Never mix severely worn tines with new tines on the same axle to avoid uneven bearing side-loads on the transmission output seals.

product-816-816

Field Maintenance & Regrinding Guidelines

Routine Cleaning: Clear tangled grass and packed soil from the hub and axle seal area after each working session to prevent dirt ingress into the reduction gearbox.

Edge Touch-Up: Tines can be sharpened with a hand angle grinder or wet stone along the original bevel angle when edges become rounded.

Scrapping Threshold: Replace the blade set immediately if blade thickness wears down by more than 30%, or if visible stress cracks develop near mounting holes. Keeping sharp tines reduces engine fuel consumption by over 15% and protects the worm drive gearbox from overload.

Quality and Craftsmanship Details

 

product-1500-1500

 

 

 

Products Package

 

 

product-1500-1500

 

About Us

 

 

Jiaxing Norsun Trading Co., Ltd.

As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.

One-Stop Sourcing Hub

YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS

Direct Factory Network

200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA

Production process

 
product-496-372
Injection MoldingPlastic & Rubber Parts
product-496-372
CNC Lathe TurningHigh-Precision OD/ID
product-496-372
CNC Machining CenterMulti-Axis Milling
-5
Precision TappingCalibrated Thread Pitch
product-496-372
Clean Assembly LineSemi-Automated Line
product-496-372
100% QC InspectionOptical & Pressure Test
product-496-372
Protective PackagingCardboard & Rust-Proof
-6
Warehouse & LogisticsFast Dispatch & Storage

Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing

 

Expo experience

 

 

product-1500-2000

 

Customer Reviews

 

 

product-1500-2000

 

 

Practical Questions & Ordering

 

 

Q:What are the key advantages of 65Mn manganese steel over standard Q235 carbon steel blades?

A: 65Mn manganese steel offers significantly higher tensile yield strength, superior wear abrasion resistance, and excellent shock toughness (HRC 48–55), preventing bending and edge chipping in rocky soil.

Q:Can these blades be arranged for both narrow inter-row weeding and wide soil tillage?

A:Yes. The modular gang structure allows operators to adjust the effective working width from 20 cm (for narrow vegetable beds and orchards) up to 50 cm for open plot seedbed preparation.

Q: Are replacement mounting bolts and lockpins included in the set?

A:Standard sets include the matched tine assemblies. High-tensile mounting hardware kits can be supplied upon request.

 

Q: What is the standard export packing and production lead time?

A:Blade sets are bundled in heavy-duty protective inner wrap and packed in master export Cardboard packaging. Standard production delivery time is 30 Days.

 

 

 

 

Hot Tags: cultivator blade for 1e48f 63cc, China cultivator blade for 1e48f 63cc suppliers

Send Inquiry