Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of gasoline generator fan case for 168f in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
168F / GX160 Gasoline Engine Blower Housing Fan Case
Heavy-Gauge Stamped Carbon Steel Flywheel Shroud with Industrial Red Enamel Coating for 5.5HP–6.5HP Small Powerplants

Mechanical Function & Thermal Airflow Guidance
On air-cooled small utility engines, the blower housing fan case acts as an aerodynamic scroll duct that captures high-velocity air driven by the spinning flywheel fan blades. It channels this forced cooling stream directly over the cylinder barrel, cylinder head fins, and spark plug area, preventing severe thermal derating during continuous multi-hour generator operation.
Thin-gauge or warped aftermarket fan shrouds frequently fail in two ways: they vibrate loose under engine operation, or they flex inward and contact the spinning flywheel fan blades, causing catastrophic blade shearing and noise. Additionally, dents in the scroll contour restrict airflow velocity, causing localized hotspots that accelerate oil breakdown and piston scuffing.
Manufactured from deep-drawn heavy-gauge carbon steel, this 168F blower housing maintains strict structural rigidity under harsh operating vibration. The front face features precision-punched multi-hole bolt patterns that accept standard 3-bolt and 4-bolt manual recoil pull starters, guaranteeing exact concentric alignment with the flywheel starter cup. Finished with an electrostatic high-bake industrial red powder coat, it provides durable resistance against fuel spills, engine heat, and outdoor corrosion.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Description | Gasoline Engine Blower Housing / Flywheel Fan Shroud Case |
| SKU / Type No. | 1601128 |
| Brand Identifier | SeaSummer |
| Compatible Engine Series | 168F, 170F, GX160, GX200 (163cc–212cc / 5.5HP–6.5HP) 4-Stroke Engines |
| Machinery Applications | 2kW–3kW Gasoline Generator Sets, Water Pumps, Cultivators, Pressure Washers |
| Material Construction | Deep-Drawn Heavy-Gauge Carbon Steel Plate (Anti-Vibration & High-Impact) |
| Surface Treatment | High-Temperature Electrostatic Powder Coating (Industrial Gloss Red Finish) |
| Mounting Interface | Standard 16 cm / 17 cm Diagonal Bolt Center Pitch + Multi-Hole Starter Flange |
| Operating Function | Directs Forced Airflow Across Cylinder Fins, Protects Rotating Flywheel & Coil |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Dimensional Verification & Flange Check
Inspect the blower housing with digital calipers to verify the recoil starter center pilot opening diameter and perimeter mounting ear hole centers (16 cm / 17 cm spacing). Confirm that the inner scroll contour is smooth, uniform, and free from stamping dents or distorted edges.

Mounting & Clearance Verification Steps
Clean the crankcase mounting pads and wipe away dirt and metal debris around the flywheel fan and ignition coil.
Check ignition coil air gap setting (0.35–0.40 mm) before installing the fan case.
Position the fan case squarely over the flywheel assembly, aligning the perimeter mounting holes with the crankcase and cylinder dowels.
Fasten all perimeter mounting bolts loosely by hand, then tighten evenly in an alternating diagonal sequence using a socket wrench.
Rotate the flywheel by hand through 360 degrees to verify that the plastic cooling fan blades maintain generous clearance and do not rub against the inner housing wall.
Bolt the recoil pull starter onto the front pilot flange.

Maintenance & Replacement Standards
Replace Immediately: Replace the fan shroud if deep impact dents cause internal contact with the flywheel fan blades, if mounting flanges crack from vibration fatigue, or if severe corrosion perforates the air duct.
Cleaning Routine: Periodically clear dry leaves, agricultural chaff, and grass clippings from the intake grille to maintain maximum cooling airflow.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:Is this fan case compatible with standard 168F, GX160, and GX200 engines?
A:Yes. The mounting bolt spacing, starter pilot diameter, and duct contour match standard 168F, 170F, GX160, and GX200 (5.5HP–6.5HP / 163cc–212cc) gasoline engines.
Q: Does this shroud accommodate standard manual recoil starters?
A:Yes. The front opening features standard pre-punched mounting bolt circles for direct drop-in installation of standard 3-hole and 4-hole recoil starter assemblies.
Q: Why is a heavy-gauge steel fan case important for generator cooling?
A:A rigid steel blower housing maintains aerodynamic airflow velocity across the cylinder cooling fins, preventing power derating and piston overheating during sustained multi-hour electrical generator operation.
Q: What are the wholesale export packing details and standard lead time?
A:Fan cases are nested with protective surface separators, packed in sturdy individual cartons, and consolidated in master Cardboard packaging. Standard production delivery time is 30 Days.
Hot Tags: gasoline generator fan case for 168f, China gasoline generator fan case for 168f suppliers, 168F GX160 Generator Carburetor Repair Kit, GX160 Spring, GX160 GX168F Generator AVR 950W, 168F 5 5HP Oil Seal 25X41 25X7, gx160 168f 5 5hp 6 5hp parts, 168F Intake Exhaust Valve

