Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of generator 168f/gx160 repair kit in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
168F / GX160 Utility Engine Carburetor & Seal Rebuild Kit
Precision CNC-Machined Solid Brass Main Metering Jet with Fuel-Resistant Elastomer O-Rings & Gaskets for 5.5HP–6.5HP Small Power Equipment

Mechanical Function & Fuel Calibration Dynamics
On small 168F and GX160 utility engines, steady generator frequency and consistent pump pressure rely entirely on precision air-fuel metering inside the float bowl carburetor. The brass main jet serves as the primary metering orifice governing the rate of liquid fuel drawn into the engine venturi under load.
During extended field operation or seasonal storage, ethanol-blended gasoline and gum residue degrade rubber seals and restrict fuel passages. Deteriorated float bowl gaskets and pilot screw O-rings draw false air or allow external fuel weeping, while partially clogged brass jets cause rough idling, severe governor hunting under load, and hard starting.
This maintenance overhaul kit restores factory fuel metering and airtight sealing. The main fuel jet is CNC-machined from solid brass with a calibrated, burr-free central orifice to ensure accurate fuel atomization. Paired with high-grade synthetic elastomer O-rings, bowl gaskets, and drain washers that resist ethanol swelling and heat aging, this kit provides a complete tune-up solution that stops fuel leaks and restores smooth throttle response.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Description | Generator Engine Carburetor & Seal Maintenance Rebuild Kit |
| SKU / Type No. | 2501077 |
| Brand Identifier | SeaSummer |
| Compatible Engine Series | 168F, 170F, GX160, GX200 (163cc–212cc / 5.5HP–6.5HP) 4-Stroke Engines |
| Machinery Applications | 2kW–3kW Generator Sets, Water Pumps, Cultivators, Pressure Washers |
| Main Jet Metallurgy | High-Grade Precision CNC-Machined Solid Brass (Corrosion & Fuel Resistant) |
| Sealing Polymer | High-Grade NBR / FKM Fuel-Resistant Elastomer (Resistant to Thermal Aging) |
| Kit Assortment | Precision Brass Main Jet, Carburetor Bowl Gasket, O-Rings, Drain Screw Washers |
| Operating Function | Restores Smooth Idle, Calibrates Air-Fuel Ratio, Eliminates Vacuum & Fuel Leaks |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Dimensional Verification & Orifice Inspection
Inspect the brass jet under magnification to confirm that the central metering orifice is round, smooth, and free of machining chips. Check the thread diameter with calipers and ensure the rubber O-rings are elastic and free from flash or cracks.

Assembly Steps
Shut off the fuel valve, drain the carburetor float bowl into a suitable container, and remove the carburetor from the engine.
Remove the float bowl nut, bowl, and old gasket, then take out the old main jet from the center column.
Clean the internal fuel passages and emulsion tube thoroughly using dedicated carburetor cleaner spray and compressed air.
Thread the new brass main jet into the center stem using a flathead screwdriver of matching width, tightening until seated snug. Avoid excessive torque to protect the brass threads.
Install the new rubber bowl gasket into its groove and fit new O-rings onto the pilot screw.
Reassemble the float bowl and tighten the drain bolt with its new washer. Reconnect the fuel line and check for zero leaks before restarting the engine.

Maintenance & Replacement Standards
Replace in Sets: Always replace rubber O-rings, bowl gaskets, and the main jet together whenever rebuilding or deep-cleaning a gummed carburetor.
Cleaning Practice: Never clean the brass jet orifice with hard steel wire or drill bits, as this enlarges the hole and causes rich running.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:Is this repair kit compatible with standard 168F, GX160, and GX200 carburetors?
A:Yes. The jet thread pitch, nozzle length, and O-ring dimensions match standard factory carburetors on 168F, 170F, GX160, and GX200 (5.5HP–6.5HP) small gasoline engines.
Q:How does replacing the main jet resolve engine surging?
A:Engine surging is often caused by a lean air-fuel mixture from a partially restricted jet. Installing a fresh, precision-machined brass jet restores the correct fuel delivery volume and stabilizes governor speed.
Q: Are the included rubber seals resistant to ethanol-blended gasoline?
A:Yes. All O-rings and gaskets are molded from fuel-grade synthetic elastomers designed to resist hardening, swelling, and cracking in modern ethanol fuels.
Q:What are the wholesale export packing details and standard lead time?
A:Each kit is packed in a labeled poly bag or blister pack, then boxed into master export Cardboard packaging. Standard production delivery time is 30 Days.
Hot Tags: generator 168f/gx160 repair kit, China generator 168f/gx160 repair kit suppliers, 168F GX160 Generator Carburetor Repair Kit, GX160 Spring, GX160 GX168F Generator AVR 950W, 168F 5 5HP Oil Seal 25X41 25X7, gx160 168f 5 5hp 6 5hp parts, 168F Intake Exhaust Valve

