Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of manual sprayer swinging rod in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Products Description
Manual Sprayer Swinging Rod - L-Shaped Pump Arm Lever for Hand-Pump Knapsack Backpack Sprayers
Replacement Black Steel Swinging Rod Pump Arm with Rubber Grip
Manual Sprayer swinging rod
The Manual Sprayer Swinging Rod is a replacement L-shaped pump arm lever for hand-pump knapsack backpack sprayers, providing the mechanical pivot arm that converts the operator's reciprocating hand motion into the piston stroke that pressurises the sprayer tank. The rod is fabricated from black powder-coated steel tube formed into a curved L-profile - with the short pivot end connecting to the pump body pivot pin and the long operating arm extending to a ribbed black rubber grip where the operator's hand applies the pumping force. This swinging rod is the primary structural component of the manual pump mechanism and the component most subject to bending fatigue, corrosion-induced cracking, and pivot wear from the cumulative loading of thousands of pump strokes per sprayer operating day. Unlike the yellow-painted rocker arm designs used on some sprayer models, this rod features an all-black powder-coat steel construction with a curved profile that smooths the pump stroke arc - reducing the wrist angle deviation at the end of each stroke and distributing pump effort more evenly through the operator's forearm and shoulder compared to straight-arm pump designs. The ribbed rubber grip at the operating end provides secure hand contact in wet and gloved field conditions, and the drilled pivot end accepts the standard pump body pivot pin for direct bolt-on installation.


Technical Profiles & Materials
1. Black Powder-Coated Steel Tube - Fatigue-Resistant, Corrosion-Protected Lever Body The swinging rod is fabricated from round steel tube and formed by cold bending into the L-shaped curved profile required for the sprayer's pump stroke geometry. The tube diameter and wall thickness are selected to provide the bending stiffness needed to transmit peak pump stroke force through the curved section without permanent deformation - a critical requirement given that the rod's curved profile creates a bending moment concentration at the curve apex that accelerates fatigue crack initiation in undersized tube sections. The black powder-coat finish provides corrosion protection against pesticide splash, moisture, and outdoor environmental exposure across multiple growing seasons of daily field use.
2. Curved L-Profile Ergonomic Geometry for Reduced Operator Fatigue The curved transition between the pivot end and the operating arm of this swinging rod is engineered to produce a smooth, arc-following pump stroke motion that keeps the operator's wrist in a more neutral position throughout the pump cycle compared to straight-arm designs. In agricultural spraying where operators perform hundreds to thousands of pump strokes per day, the cumulative wrist and forearm strain from an unfavourable pump arm geometry is a significant contributor to repetitive strain injury and end-of-day operator fatigue. The curved rod profile distributes the pump motion load more evenly across the operator's forearm, wrist, and shoulder - reducing fatigue accumulation over a full spraying day.
3. Ribbed Black Rubber Grip for Secure Wet-Condition Hand Contact The operating end of the swinging rod is fitted with a press-on ribbed black rubber grip that provides the operator's primary hand contact surface during the pump stroke. The ribbed surface profile maintains friction grip when the rubber is wet with pesticide, rain, or perspiration - preventing the grip from slipping during the downstroke where maximum hand force is applied. The rubber compound is selected for resistance to the pesticide and agricultural chemical environments encountered in field spraying, preventing grip softening or swelling that would reduce grip friction and operator control.
Technical Specifications
| ITEM | DETAILS |
| Type | Replacement L-shaped swinging rod pump arm lever - manual hand-pump knapsack sprayer pressure generation component |
| Application | Compatible with manual hand-pump knapsack backpack sprayers using L-shaped swinging rod pump arm configurations; suitable for rice paddy, vegetable farm, orchard, and field crop pesticide, herbicide, and fertiliser spraying applications |
| Code | 0601015 |
| Material | Black powder-coated round steel tube body (curved L-profile); ribbed black rubber grip (press-fit); drilled steel pivot end for pump body pivot pin mounting |
| Details explanation | L-shaped curved profile for ergonomic arc pump stroke; ribbed rubber grip for wet and gloved hand operation; drilled pivot mounting end for standard pump body pivot pin; direct bolt-on installation - no modification required; black powder-coat finish for corrosion and chemical resistance; suitable for left and right-hand pump operation |
| Brand Name | SeaSummer |
| Operating Temp | Rated for ambient operating temperatures of -10°C to +55°C (14°F to +131°F); powder-coat and rubber grip maintain performance across standard tropical and temperate agricultural field operating conditions |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Rice Paddy & Staple Crop Pesticide Spraying
Manual knapsack sprayers fitted with swinging rod pump arms are widely used for pesticide and herbicide application in rice paddies and staple crop fields across Asia and Africa. The pump arm is subjected to its highest stress levels during the rhythmic, sustained pumping required to maintain spray pressure across large paddy field areas - conditions that accelerate bending fatigue in the curve section of the rod. This replacement swinging rod restores the full pump stroke efficiency the operator needs to maintain adequate spray pressure for complete coverage of the crop canopy in a single field session, without the reduced stroke and pressure loss caused by a bent or cracked original arm.

Vegetable Farm & Horticultural Crop Protection
Commercial vegetable growers running high-frequency chemical application programmes subject their sprayer pump arms to the highest pump cycle counts per season - potentially hundreds of thousands of strokes across a full growing year. Proactive swinging rod replacement at the start of each growing season - before pump arm fatigue failure disrupts a critical spray event - is a practical maintenance strategy for commercial vegetable operations where uninterrupted sprayer function directly protects high-value crop investment from pest and disease losses.

Agricultural Equipment Repair Shops & Parts Dealers
The swinging rod pump arm is one of the most frequently requested mechanical repair parts for manual knapsack sprayers in rural agricultural equipment repair shops, driven by its high-cycle mechanical loading and exposure to corrosive field environments. Dealers stocking this replacement rod can offer fast turnaround on the most common manual sprayer structural repair - restoring a failed sprayer to full operation in a single service visit and building customer loyalty among farming communities where sprayer reliability directly affects crop protection outcomes and seasonal income.
Quality and Craftsmanship Details



Products Package

About Us
As a premier garden machinery parts supplier, Jiaxing Norsun Trading Co., Ltd. bridges global distributors with over 100 vetted China manufacturers. We streamline your B2B supply chain through strict quality control, flexible production, and factory-direct wholesale pricing. Partner with us for reliable, high-volume sourcing of precision-engineered outdoor power equipment components.
Trusted Partnership Power
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Verified Factory Excellence
BACKED BY 200+ TRUSTED FACTORY PARTNERS
Production process








Quality control




Expo experience

Customer Reviews

FAQ
Q: Are you an impartial industrial components dealer or a direct China water pump factors factory?
A:We are a direct, ISO9001-certified engineering water pump components manufacturing facility and precision fluid-control factor manufacture exporter primarily based in China. We function our personal cleanroom injection molding bays, computerized ultrasonic welding arrays, computerized hydraulic stress check stations, and clean-room packaging lines, passing direct-factory wholesale price financial savings straight to your element procurement margins.
Q: Can your manufacturing unit furnish full certification forms for food-contact or consuming water compliance?
A: Yes, absolutely. For food, beverage, or scientific applications, our manufacturing unit makes use of one hundred percent virgin, un-recycled polypropylene resins accompanied by means of fabric traceability certificates. We mechanically furnish B2B purchasers with complete FDA compliance documentation, NSF-grade compound declarations, and RoHS/REACH chemical protection screening sheets to make certain clean clearance thru worldwide customs.
Q: Do you provide customization picks for distinctly corrosive fluids like sturdy acids or ozone?
A: Yes, we are a thoroughly succesful OEM/ODM supplier. For aggressive chemical or ozone environments, we can improve the 12x26.5mm valve configuration in our factory: substituting the general PP housing with top class PVDF (Fluoropolymer) and changing any steel springs with Hastelloy or whole springless gravity-ball architecture, making sure final chemical resistance.
Q: How do we impervious a pattern batch to execute computerized lifecycle and burst-pressure testing?
A: We relatively inspire complete laboratory contrast earlier than logging mass grant agreements. We can ship a pattern lot of 5-10 gadgets of our inventory 12x26.5mm take a look at valves for assessment (setup costs and DHL/FedEx air freight apply). Once the factors pass by your inner lifecycle verification and a formal wholesale quantity manufacturing contract or container run is locked in, the sampling charges are a hundred percent credited returned to your industrial balance.
Hot Tags: manual sprayer swinging rod, China manual sprayer swinging rod suppliers, Big Sprayer Head, manual sprayer parts, other manual sprayer parts, Small Sprayer Head, Sprayer Gun 53cm, Sprayer Nozzle

