Air Compressor Cylinder+packing Cup 68X48mm

Air Compressor Cylinder+packing Cup 68X48mm

SKU: 1401387
Sleeve Dimensions: 69.0mm OD × 63.5mm ID × 50.0mm Height | Hard Anodized Aluminum (HV 450+)
Cup Dimensions: 68.0mm Flat OD × 48.0mm Center ID × 0.90mm Thickness | Modified Filled PTFE
Working Pressure: 0.7–0.8 MPa (7–8 Bar / 100–115 PSI) | Temp Range: -30°C to +180°C (-22°F to +356°F)
Applications: 1100W (1.5 HP) silent oil-free air compressors, dental surgical units, and clean industrial pumps
Lead Time: 30 Days (Custom packaging & OEM supported)
Send Inquiry
Add To Inquiry
Description

Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of air compressor cylinder+packing cup 68x48mm in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.

 

Product Introduction

Air Compressor Cylinder + Packing Cup (1100W Type)

Anodized Aluminum Long-Stroke Cylinder Sleeve & Self-Lubricating PTFE Piston Cup Set for 1100W Silent Oil-Free Compressors

Long-Stroke Compression Rebuild Kit for 1100W Oil-Free Pumps

Silent oil-free air compressor pump heads run without oil, relying on a dry self-lubricating seal between the cylinder wall and piston cup. This rebuild set includes a 50mm tall hard-anodized aluminum cylinder liner paired with a 0.90mm thick filled-PTFE packing cup, sized specifically for the longer stroke and higher CFM displacement of 1100W (1.5 HP) compressor motors.

Sizing and 50mm Cylinder Height Fitment

While smaller 550W pumps use a short 24.5mm sleeve, 1100W motors feature a larger crank throw that requires this 50.0mm tall sleeve to maintain full piston travel support. The sleeve has a 63.5mm inner bore and 69.0mm outer diameter. The matching 68mm flat PTFE cup features a 48.0mm center hole that mounts beneath the conrod clamping plate, folding upward against the cylinder wall to create a dynamic seal during compression.

Dry-Running Self-Lubricating Materials for Clean Air

The piston cup is formed from modified PTFE containing wear-reducing additives, providing low friction against the mirror-honed liner bore (Ra <= 0.2 um). The hard-anodized surface treatment (hardness over HV 450) protects the aluminum cylinder against abrasive wear, delivering 100% oil-free air for dental clinics, food packaging, and laboratory environments.

product-1024-1024
product-1024-1024

Technical Profiles & Materials

Hard-Anodized Aluminum Cylinder Sleeve: 50.0mm long-stroke aluminum liner treated with hard anodizing (HV 450+) to provide a scratch-resistant inner bore (Ra <= 0.2 um) for dry piston stroking.

Modified Filled PTFE Piston Cup: 0.90mm thick self-lubricating PTFE composite withstands continuous operating temperatures from -30°C to +180°C without thermal degradation.

Factory Matched Dimensions: 63.5mm cylinder bore paired with a 68×48mm cup provides consistent seal contact and compression recovery across 1100W pump rebuilds.

 

Technical Specifications

 

 

ITEM DETAILS
Type Air Compressor Cylinder + Packing Cup (1100W Type)
Application 1100W (1.5HP) silent oil-free air compressors, dental pumps, and clean air systems
Code 1401387
Material Hard-Anodized Aluminum Alloy Sleeve; Modified Filled PTFE Piston Cup
Details explanation Sleeve: 69.0mm OD × 63.5mm ID × 50.0mm H; Cup: 68.0mm OD × 48.0mm ID × 0.90mm T
Brand Name SeaSummer
Operating Temp -30°C to +180°C (-22°F to +356°F)
Delivery Time 30 Days
Packaging Cardboard packaging

 

Products Application

 

 

product-816-816

Incoming Inspection and Sleeve Height Verification

Inspected on shop workbenches with digital vernier calipers and bore gauges to verify the 50.0mm sleeve height, 63.5mm inner bore, and 68×48mm PTFE cup dimensions before assembly staging.

product-816-816

Piston Plate and Cylinder Sleeve Installation

Clamped to the connecting rod top plate using a retaining disc and center bolt, folded upward into the 50mm cylinder sleeve, and seated into the pump block crankcase bore.

product-816-816

Maintenance Replacement for Low Pressure Output

Replaced by service technicians when worn or grooved piston cups cause slow tank recovery times, reduced air delivery, or inability to reach 8 Bar cut-out pressure.

Quality and Craftsmanship Details

 

product-1500-1500

product-1500-1500

 

 

Products Package

 

 

product-1500-1500

 

About Us

 

 

Jiaxing Norsun Trading Co., Ltd.

As a premier garden machinery parts supplier, Jiaxing Norsun Trading Co., Ltd. bridges global distributors with over 100 vetted China manufacturers. We streamline your B2B supply chain through strict quality control, flexible production, and factory-direct wholesale pricing. Partner with us for reliable, high-volume sourcing of precision-engineered outdoor power equipment components.

Trusted Partnership Power

YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS

Verified Factory Excellence

BACKED BY 200+ TRUSTED FACTORY PARTNERS

Production process

 
-1
Assembling
-2
CNC Machining Center
-8
CNC Lathe
-5
Tapping Machine
-3
Tapping Machine
-7
Injection Molding Machine
-4
Inspecting
-6
Warehousing

Quality control

 
-1
-3
-4
-2

Expo experience

 

 

product-2000-2667

 

Customer Reviews

 

 

product-2000-2667

 

 

FAQ

 

 

Q: What is the difference between this 1100W sleeve set and the 550W version?

A:Both share the same 63.5mm inner bore and 68mm cup diameter, but this 1100W sleeve is 50.0mm tall to accommodate the longer piston stroke of 1100W (1.5 HP) motors (compared to 24.5mm height on 550W units). The PTFE cup is also slightly thicker (0.90mm vs 0.85mm) for higher output duty.

Q: What dimensions should I check on my old pump parts?

A:Measure the cylinder sleeve height (50.0mm), sleeve inside diameter (63.5mm), and the center mounting hole on your old PTFE cup (48.0mm).

Q: How should the PTFE cup be oriented during installation?

A:Place the cup between the connecting rod top boss and the clamping disc, ensuring the lip folds upward toward the cylinder head valve plate when pressed into the sleeve. Never apply grease, silicone, or oil to the parts.

Q: Can you provide rebuild sets for other motor power ratings?

A: Yes. We manufacture cylinder sleeves and PTFE cups for 550W (24.5mm height), 750W (25mm height / 68mm bore), 1100W (50mm height), and 1500W oil-free compressors, with custom PTFE blends and branded packaging available for OEM orders.

 

 

 

 

 

 

 

Hot Tags: air compressor cylinder+packing cup 68x48mm, China air compressor cylinder+packing cup 68x48mm suppliers, CBB60 60UF Capacitor, Air Compressor Muffler Plastic 1 2 Flat Angle, Air Compressor 1 4 Double Outer Ball Valve, Air Compressor 12X240 Copper Plated Natural Color, Air Compressor 3 8X3 8 Zinc Elbow 16 5X16 5mm, Air Compressor 12X230 Copper Plated Natural Color

Send Inquiry