Centrifugal Switch Single Phase

Centrifugal Switch Single Phase

SKU: 2001168 (Model: L19-302/4Y)
Rotor Shaft Bore Fitment: 19.0mm Diameter Shaft (YC / YL Series Single-Phase Motors)
Motor Speed & Pole Configuration: Compatible with 2-Pole (2800–3000 RPM) & 4-Pole (1400–1500 RPM, 4Y) Motors
Electrical Contact Rating: 10A–16A @ 250V AC (Silver Alloy AgSnO2 Contacts, Normally Closed - NC)
Mounting Hole Center Distance: Approx. 45.0mm – 55.0mm Slotted Base Plate Holes
Construction: Flame-Retardant Phenolic / Bakelite Insulated Base with Stamped Steel Rocker Arm & Screw Terminals
Primary Application: Automatic start-winding and start-capacitor disconnection on single-phase air compressor motors, power pumps, and workshop machinery
Lead Time: 30 Days (Custom packaging & OEM supported)
Send Inquiry
Add To Inquiry
Description

Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of centrifugal switch single phase in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.

 

Product Overview & Operating Details

Centrifugal Switch Single Phase

L19-302/4Y Single-Phase Electric Motor Centrifugal Switch Contact Base (19mm Shaft Fitment)

Start Circuit Control for Single-Phase Motors

Single-phase AC induction motors rely on an auxiliary start winding and high-microfarad start capacitor to generate starting torque from a stationary state. This L19-302/4Y centrifugal switch contact base mounts inside the motor rear end bell, maintaining electrical contact during startup and cleanly disconnecting the auxiliary circuit once the rotor accelerates to 75%–80% of rated synchronous speed.

Normally Closed Contacts with Automatic Cut-Out

At zero speed, the internal spring-loaded contact points remain firmly closed (NC), routing line voltage to the start capacitor and auxiliary winding. As the rotor accelerates, the companion rotating centrifugal weight mechanism expands outward against its calibration springs, pushing the switch's arched metal rocker bracket forward to snap open the silver contacts and protect the start capacitor from continuous energization.

product-1024-1024
product-1024-1024

Flame-Retardant Bakelite Base with Silver Alloy Points

Built on a high-dielectric phenolic resin base plate, the switch assembly withstands elevated motor interior temperatures up to 130°C without charring or dimensional creep. Dual screw terminal blocks provide secure wire clamping for motor lead cables, while anti-arcing silver alloy contact buttons (AgSnO2) resist pitting and welding across over 100,000 duty cycles.

 

Technical Specifications

 

 

ITEM DETAILS
Type Centrifugal Switch Single Phase (19-302/4Y)
Application Single-phase compressor motors (YL/YC series, 19mm shaft, 2-pole & 4-pole)
Code 2001168
Material Phenolic Bakelite Base, Stamped Steel Arm, Silver Alloy Contacts
Details explanation 19mm Shaft Fitment; 10–16A 250VAC; Normally Closed (NC); Slotted Mounting Holes
Brand Name SeaSummer
Operating Temp -20°C to +130°C (-4°F to +266°F)
Delivery Time 30 Days
Packaging Cardboard packaging

 

Products Application

 

 

product-1024-1024

Contact Inspection and Terminal Screw Verification

Inspect the contact gap, verify smooth pivoting movement of the arched metal rocker arm, and check terminal screw threads before installing into the motor end shield.

product-1024-1024

Mounting Switch Base Inside Motor End Bell

Fasten the bakelite base plate into the threaded bosses of the motor rear end cover, adjust the 45–55mm slotted hole alignment relative to the rotor actuator ring, and tighten terminal leads.

product-1024-1024

Single-Phase Motor Teardown & Rebuild

Replaces pitted, stuck, or burned centrifugal switch contacts during motor overhauls when a motor hums without starting or repeatedly trips thermal breakers due to failure to disengage the start capacitor.

Quality and Craftsmanship Details

 

product-1500-1500

product-1500-1500

 

 

Products Package

 

 

product-1500-1500

 

About Us

 

 

Jiaxing Norsun Trading Co., Ltd.

As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.

One-Stop Sourcing Hub

YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS

Direct Factory Network

200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA

Production process

 
product-496-372
Injection MoldingPlastic & Rubber Parts
product-496-372
CNC Lathe TurningHigh-Precision OD/ID
product-496-372
CNC Machining CenterMulti-Axis Milling
-5
Precision TappingCalibrated Thread Pitch
product-496-372
Clean Assembly LineSemi-Automated Line
product-496-372
100% QC InspectionOptical & Pressure Test
product-496-372
Protective PackagingCardboard & Rust-Proof
-6
Warehouse & LogisticsFast Dispatch & Storage

Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing

 

Expo experience

 

 

product-1500-2000

 

Customer Reviews

 

 

product-1500-2000

 

 

FAQ

 

 

Q: What does the designation "19-302Y / 19-304Y" mean?

A: "19" indicates the motor rotor shaft diameter (19mm). "302" specifies a 2-pole motor calibration (approx. 2800–3000 RPM), while "304" (or 4Y) designates a 4-pole motor calibration (approx. 1400–1500 RPM). The contact base plate operates with both rotating centrifugal governor mechanisms.

Q: What motor types use this 19mm centrifugal switch?

A:It fits standard single-phase dual-capacitor (capacitor-start / capacitor-run) and capacitor-start induction motors, including YL, YC, and YU frame motors commonly used on piston air compressors, high-pressure washers, agricultural sprayers, and table saws.

Q: What happens if the centrifugal switch fails to open?

A: If the switch contacts weld or remain closed at full motor speed, the short-duty start capacitor remains continuously energized, which will overheat and blow the start capacitor within 10 to 30 seconds. Replacing worn contact plates prevents repeated capacitor failures.

Q: Do you offer other shaft sizes and complete switch sets?

A: Yes. We manufacture centrifugal switch contact plates and rotating governor centrifugal weight rings across standard shaft diameters (14mm, 16mm, 19mm, 22mm, 24mm, 25mm, 28mm, 32mm, and 34mm), available individually or as complete matching sets.

 

 

 

 

Hot Tags: centrifugal switch single phase, China centrifugal switch single phase suppliers, CBB60 60UF Capacitor, Air Compressor Muffler Plastic 1 2 Flat Angle, Air Compressor 1 4 Double Outer Ball Valve, Air Compressor 12X240 Copper Plated Natural Color, Air Compressor 3 8X3 8 Zinc Elbow 16 5X16 5mm, Air Compressor 12X230 Copper Plated Natural Color

Send Inquiry