Air Compressor Washer 72X48mm 2pcs

Air Compressor Washer 72X48mm 2pcs

SKU: 1401439
Set Configuration: 2-Piece Matched Gasket Pair (1 Cylinder Top Gasket + 1 Valve Plate Partition Gasket)
Outer Profile & Dimensions: 72.0mm × 48.0mm Outer Envelope with 4 Corner Bolt Notches
Material: High-Density Non-Asbestos Composite Fiber Board / NBR-Bound Sealing Sheet (Black)
Pressure Tolerance: Rated up to 2.0 MPa (20 Bar / 300 PSI Max Burst Resistance)
Thermal Resistance: Continuous Operating Range from -20°C up to +150°C (Intermittent Peak +200°C)
Primary Application: Direct-drive and portable reciprocating air compressor pump heads (25L–50L tank capacity, 1.5–3.0 HP)
Lead Time: 30 Days (Custom packaging & OEM supported)
Send Inquiry
Add To Inquiry
Description

Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of air compressor washer 72x48mm 2pcs in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.

 

Product Overview & Operating Details

Air Compressor Washer 72X48mm 2pcs

72x48mm Cylinder Head & Valve Plate Sealing Gasket Set (2-Piece) for 25L–50L Direct-Drive Air Compressors

Cylinder Head and Valve Plate Sealing Integrity

In small reciprocating air compressors, maintaining airtight compression and preventing intake-exhaust cross-bleeding depends on the precision of the head gaskets. This 72x48mm 2-piece gasket set forms high-pressure micro-seals between the cast aluminum cylinder barrel, valve reed plate, and top cylinder head, isolating pressurized air chambers across continuous 8 to 10 bar operating cycles.

Matched 2-Piece Functional Geometry

The set includes two distinct die-cut profiles engineered for exact port alignment:

Cylinder Top Gasket: Features a large circular bore cutout with top indexing tab to seal the perimeter between the piston cylinder barrel and the lower valve plate.

Valve Plate Separator Gasket: Incorporates a V-shaped inner divider bridge that separates the intake chamber from the high-pressure discharge chamber within the cylinder head cap. Both gaskets include four pre-punched corner bolt relief notches to prevent bolt hole distortion during final head bolt torqueing.

product-1024-1024
product-1024-1024

Compressible High-Recovery Composite Material

Manufactured from non-asbestos aramid and synthetic elastomer-bound composite sheet, the material delivers balanced compressibility and elastic recovery. When clamped under head bolt tension, the gasket flows into micro-irregularities and machining tool marks on cast aluminum surfaces, preventing gasket blowout, oil seepage, and thermal shrinkage over extended duty cycles.

 

Technical Specifications

 

 

ITEM DETAILS
Type Air Compressor Washer 72X48mm 2pcs
Application 25L–50L portable direct-drive compressor pump heads, valve plates
Code 1401439
Material Non-Asbestos Composite Fiber Board / NBR Binder
Details explanation 72x48mm Outer Envelope; 2-Piece Matched Set (Round + V-Channel Profiles)
Brand Name SeaSummer
Operating Temp -20°C to +150°C (-4°F to +302°F)
Delivery Time 30 Days
Packaging Cardboard packaging

 

Products Application

 

 

product-1024-1024

Gasket Geometry & Bolt Hole Alignment Check

Inspect the 72x48mm outer dimensions, verify corner bolt clearance notches, and confirm that both the round chamber gasket and V-partition gasket match the replacement valve plate profile.

product-1024-1024

Installing Gaskets During Pump Head Assembly

Place the lower gasket onto the cylinder top face, position the reed valve plate, place the V-divider gasket, and torque the cylinder head bolts in a cross pattern to ensure even clamping pressure.

product-1024-1024

Replacing Blown Gaskets During Compressor Rebuilds

Used during pump overhauls when degraded or burned gaskets cause pressure drop, continuous unloader hissing, or air blowing out between head and cylinder cooling fins.

Quality and Craftsmanship Details

 

product-1500-1500

product-1500-1500

 

 

Products Package

 

 

product-1500-1500

 

About Us

 

 

Jiaxing Norsun Trading Co., Ltd.

As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.

One-Stop Sourcing Hub

YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS

Direct Factory Network

200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA

Production process

 
product-496-372
Injection MoldingPlastic & Rubber Parts
product-496-372
CNC Lathe TurningHigh-Precision OD/ID
product-496-372
CNC Machining CenterMulti-Axis Milling
-5
Precision TappingCalibrated Thread Pitch
product-496-372
Clean Assembly LineSemi-Automated Line
product-496-372
100% QC InspectionOptical & Pressure Test
product-496-372
Protective PackagingCardboard & Rust-Proof
-6
Warehouse & LogisticsFast Dispatch & Storage

Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing

 

Expo experience

 

 

product-1500-2000

 

Customer Reviews

 

 

product-1500-2000

 

 

FAQ

 

 

Q: What compressor models use this 72x48mm 2-piece gasket set?

A: This gasket set fits standard 25L and 50L direct-drive portable piston air compressors (commonly equipped with 1.5 HP, 2.0 HP, and 2.5 HP single-phase motors). It matches standard rectangular cylinder heads with four corner tie bolts.

Q:Why are the cutouts different on the two gaskets in the set?

A:The gasket with the round cutout seals between the cylinder bore and the bottom of the valve plate. The gasket with the V-shaped center divider sits between the top of the valve plate and the cylinder head cap, physically separating incoming suction air from compressed discharge air.

Q: Should gasket sealant or RTV silicone be used during installation?

A:No liquid sealant is required. The composite material is engineered to compress dry directly against clean, flat metal surfaces. Applying liquid silicone can migrate into valve reed seats or air passages, causing valve sticking.

Q: Do you offer custom die-cut dimensions or alternative materials?

A:Yes. We produce compressor gaskets in various thicknesses (0.5mm, 0.8mm, 1.0mm, and 1.5mm) using high-temperature composite sheet, reinforced graphite, or annealed copper for high-pressure industrial compressor heads.

 

 

 

 

Hot Tags: air compressor washer 72x48mm 2pcs, China air compressor washer 72x48mm 2pcs suppliers, CBB60 60UF Capacitor, Air Compressor Muffler Plastic 1 2 Flat Angle, Air Compressor 1 4 Double Outer Ball Valve, Air Compressor 12X240 Copper Plated Natural Color, Air Compressor 3 8X3 8 Zinc Elbow 16 5X16 5mm, Air Compressor 12X230 Copper Plated Natural Color

Send Inquiry