Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of brush cutter ignition coil for om753/om753t in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
Brush Cutter Ignition Coil (OM753 / OM753T)
Electronic Armature Magneto Module for Oleo-Mac 52.5cc Commercial 2-Stroke Engines

Mechanical Construction & Ignition Timing
Silicon Steel Lamination Core
The magnetic core is assembled from riveted cold-rolled non-oriented silicon steel plates. The slotted mounting holes provide adjustable positioning on the crankcase boss, allowing precise setting of the radial clearance between the coil pole shoes and the flywheel magnet.
High-Voltage Induction and Starting Threshold
The integrated primary and secondary windings generate 18 kV to 22 kV of peak secondary voltage. The solid-state electronic switching circuit triggers at cranking speeds below 400 RPM, providing consistent spark generation during manual pull starts.
Vacuum Epoxy Encapsulation
The internal copper windings and electronic switching components are sealed under vacuum in solid epoxy resin. This solid encapsulation protects against vibration, moisture, and oily dirt buildup around the engine flywheel shroud.
High-Tension Lead and Stop Switch Connection
The module features a reinforced silicone high-tension lead fitted with a 90-degree spark plug boot. A standard spade terminal provides connection to the handlebar stop switch for grounding and shutting off the ignition circuit.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product | Brush Cutter Ignition Coil |
| SKU | 0211015 |
| Brand | SeaSummer |
| OEM Reference Number | 4196142R |
| Ignition System Type | Electronic CDI Magneto Module |
| Secondary Voltage Output | ≥ 18 kV – 22 kV |
| Starting Ignition Speed | ≤ 350 RPM – 400 RPM |
| Core Material | Laminated Silicon Steel Plates |
| Encapsulation | Vacuum Epoxy Resin Encapsulated (IP67) |
| Recommended Air Gap | 0.30 mm – 0.40 mm (Nominal 0.35 mm / 0.014") |
| Mounting Hardware | Symmetrical Slotted Holes for M5 Bolts |
| Lead Cable & Boot | High-Tension Silicone Cable with 90° Rubber Boot |
| Kill Switch Terminal | Standard Single Spade Ground Terminal |
| Fastener Torque | 4.5 N·m – 6.0 N·m |
| Compatible Models | Oleo-Mac 753S, 753T (Pre-02/2006), 746S, 746T, 750, 755, 446BP, 450BP, 453BP |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Electrical and Spark Output Inspection
Production samples are bench-tested with multimeters to verify winding resistance and checked on ignition test rigs to verify firing voltage across operating RPM ranges.

Air Gap Calibration and Fastening
Align the flywheel magnet with the coil poles, insert a 0.35 mm feeler gauge between the pole shoes and the magnet rotor, and tighten the M5 mounting bolts to 4.5–6.0 N·m.

Field Operation
Consistent spark timing supports responsive acceleration and steady cutting torque during commercial brush clearing.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

FAQ
Q: Which machine models use this 4196142R ignition coil?
A: It is designed for Oleo-Mac and Emak 52.5cc commercial brush cutters, including 753S, 753T (manufactured prior to February 2006), 746S, 746T, 750, 755, 446BP, 450BP, and 453BP models.
Q: What is the procedure for setting the flywheel air gap?
A:Rotate the flywheel until the magnetic section faces the coil poles. Place a 0.35 mm (0.014 inch) feeler gauge between the coil pole shoes and the flywheel magnet, allow the magnet to hold the coil in place, torque the bolts to 4.5–6.0 N·m, and slide out the feeler gauge.
Q: How do I route the high-tension lead to prevent heat damage?
A:Route the silicone lead through the molded cable guide channel inside the engine fan shroud, keeping it clear of the cylinder exhaust port and muffler housing.
Hot Tags: brush cutter ignition coil for om753/om753t, China brush cutter ignition coil for om753/om753t suppliers

