Brush Cutter Cylinder Assy For OM25

Brush Cutter Cylinder Assy For OM25

SKU / Model: 3201001 | Cylinder & Piston Rebuild Kit Series
Bore & Piston Dimensions: 34.0 mm nominal cylinder bore (0 to +0.015 mm tolerance), 33.96 mm piston diameter
Kit Components: 1x Die-cast aluminum cylinder block, 1x piston, 1x piston ring, 1x 8.0 mm wrist pin, 2x circlips
Bore Surface Finish: Precision hard-chrome / Nikasil bore plating (micro-hardness ≥ HV 800)
Engine Compatibility: Oleo-Mac OM25, Sparta 25, Sparta 250, Sparta 26 and Efco Stark 25, Stark 250, Stark 26 (25.4cc engines)
Delivery Time: 30 Days
Packaging: Cardboard packaging
Send Inquiry
Add To Inquiry
Description

Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of brush cutter cylinder assy for om25 in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.

 

Product Overview & Operating Details

Brush Cutter Cylinder & Piston Assembly

34mm Bore Top-End Rebuild Kit for Oleo-Mac Sparta 25, OM25, and Efco Stark 25 2-Stroke Trimmer Engines

 
 
product-1024-1024

Mechanical Construction & Engine Rebuilding

Die-Cast Aluminum Cylinder Architecture

Manufactured from high-grade die-cast aluminum alloy, the cylinder block features integrated cooling fins configured to maximize heat dissipation from the combustion dome and exhaust port. The structure maintains dimensional stability under high-RPM cutting loads on 25.4cc commercial two-stroke platforms.

Hard-Chrome Plated Cylinder Wall

The inner cylinder bore is coated with a wear-resistant hard-chrome layer with a micro-hardness exceeding HV 800. Precision cross-hatch honing retains a continuous lubricating oil film, reducing frictional wear between the piston ring and cylinder wall to prevent scoring under extended operation.

Low-Expansion High-Silicon Piston Assembly

The matched 33.96 mm piston is cast from high-silicon aluminum alloy, providing a controlled 0.03 mm to 0.05 mm running clearance inside the 34.0 mm bore. The piston crown features an engraved alignment arrow indicating the correct orientation toward the exhaust port during installation.

Ductile Alloy Piston Ring and Precision Wrist Pin

The kit includes a high-elasticity ductile cast iron piston ring engineered to seat against the internal anti-rotation locator pin in the ring land. An 8.0 mm ground steel wrist pin and dual wire circlips secure the piston assembly to the connecting rod small-end needle bearing.

 

 

Technical Specifications

 

 

Parameter Specification
Product Brush Cutter Cylinder & Piston Assembly
SKU 3201001
Brand SeaSummer
Compatible Platform Oleo-Mac OM25 / Sparta 25 / Efco Stark 25 Platform
Nominal Cylinder Bore Φ 34.0 mm (Tolerance: 0 to +0.015 mm)
Piston Skirt Diameter Φ 33.96 mm ± 0.01 mm
Wrist Pin Diameter Φ 8.0 mm Precision Ground Steel Pin
Displacement Class 25.4 cc (2-Stroke Single-Cylinder)
Cylinder Plating Precision Hard Chrome / Nikasil Plating (≥ HV 800)
Cylinder Body Material High-Grade Die-Cast Aluminum Alloy
Piston Material High-Silicon Low-Expansion Cast Aluminum
Piston Ring Type Nodular Ductile Cast Iron Sealing Ring
Included Components Cylinder Block, Piston, Piston Ring, Wrist Pin, 2x Circlips
Compatible Models Oleo-Mac OM25, Sparta 25, Sparta 250, Sparta 26; Efco Stark 25, Stark 250, Stark 26
Delivery Time 30 Days
Packaging Cardboard packaging

 

Products Application

 

 

product-1024-1024

Bore Micrometer and Piston Clearance Inspection

Every cylinder is inspected on the bench using an internal dial bore gauge to verify roundness, taper, and 34.0 mm nominal bore dimensions against technical drawings.

product-1024-1024

Piston Ring Alignment and Cylinder Installation

Lubricate the cylinder wall and piston with clean 2-stroke oil. Align the piston ring end gap with the locator pin in the piston groove, orient the crown arrow toward the exhaust port, and slide the cylinder over the piston.

product-1024-1024

Field Performance

Restored cylinder compression supports clean acceleration, crisp throttle response, and steady power output during commercial grass and weed trimming.

Quality and Craftsmanship Details

 

product-1500-1500

 

 

 

Products Package

 

 

product-1500-1500

 

About Us

 

 

Jiaxing Norsun Trading Co., Ltd.

As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.

One-Stop Sourcing Hub

YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS

Direct Factory Network

200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA

Production process

 
product-496-372
Injection MoldingPlastic & Rubber Parts
product-496-372
CNC Lathe TurningHigh-Precision OD/ID
product-496-372
CNC Machining CenterMulti-Axis Milling
-5
Precision TappingCalibrated Thread Pitch
product-496-372
Clean Assembly LineSemi-Automated Line
product-496-372
100% QC InspectionOptical & Pressure Test
product-496-372
Protective PackagingCardboard & Rust-Proof
-6
Warehouse & LogisticsFast Dispatch & Storage

Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing

 

Expo experience

 

 

product-1500-2000

 

Customer Reviews

 

 

product-1500-2000

 

 

FAQ

 

 

Q: Which trimmer models are compatible with this 34mm cylinder kit?

A: It is designed for 25.4cc 2-stroke engines used on Oleo-Mac OM25, Sparta 25, Sparta 250, Sparta 26, as well as Efco Stark 25, Stark 250, and Stark 26 trimmers and brush cutters.

Q: What is the correct orientation of the piston during assembly?

A:The arrow or "EX" marking stamped on the piston crown must point toward the exhaust port. Ensure the piston ring end gap is centered on the brass anti-rotation pin in the ring groove before sliding the cylinder block on.

Q: What is the recommended engine break-in procedure?

A: For the first 3 to 5 fuel tanks after rebuilding, use a 20:1 to 25:1 fuel-to-oil mixture and avoid sustained wide-open throttle operation to allow the new piston ring and honed cylinder wall to seat evenly.

 

 

 

 

Hot Tags: brush cutter cylinder assy for om25, China brush cutter cylinder assy for om25 suppliers

Send Inquiry