Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of brush cutter t35 trimmer head in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
Brush Cutter T35 Bump Feed Trimmer Head (M10×1.25 LH)
Tap-n-Go Nylon Line Head for 25cc–35cc Trimmers

Product Introduction
The T35 is a commercial bump-feed trimmer head used for lawn maintenance, edging along curbs, and clearing weeds around fence lines and tree trunks.
Tapping the blue center knob against the ground while running releases line without stopping the motor. An internal spring compresses on impact, letting the spool advance one notch so centrifugal force pulls out fresh nylon line. The excess line is sliced to length by the guard knife on the trimmer shield.
The body and bump knob are molded from glass-reinforced PA66 nylon to take hits against curbs and stone walls without cracking. Polished aluminum eyelets line the exit holes to reduce friction heat, preventing the nylon cord from melting and welding inside the head.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product | Brush Cutter T35 Trimmer Head |
| SKU | 2401063 |
| Brand | SeaSummer |
| Housing Material | Impact-Resistant Reinforced PA66 Nylon |
| Line Exit Eyelets | Aluminum Alloy Sleeves |
| Thread Size | M10 × 1.25 Left-Hand Female (M12L / Universal optional) |
| Line Diameters | 2.0 mm, 2.4 mm, 2.7 mm (Round, Square, Twisted) |
| Spool Capacity | 8.5 m (2.4 mm line) / 7.0 m (2.7 mm line) |
| Compatible Engines | 25cc to 35cc (Husqvarna 135R, 323R, 333R, 335FR) |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Fitment Check
Verify your trimmer gearbox has an M10 × 1.25 left-hand male threaded arbor before mounting.

Mounting Steps
1.Lock the gearcase output shaft using a hex key in the timing hole.
2.Spin the T35 head counter-clockwise (left-hand thread) onto the spindle.
3.Hand-tighten the head against the drive washer. The head self-tightens during operation.
4.Remove the locking pin before starting the engine.

Loading New Line
Squeeze the side tabs to remove the cover. Cut two equal lengths of 2.4 mm or 2.7 mm line, hook the ends into the spool slots, and wind in the direction of the molded arrows. Thread the loose ends through the aluminum eyelets and snap the housing closed.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q: What trimmers take this M10×1.25 LH head?
A:It threads directly onto straight-shaft trimmers with an M10 × 1.25 left-hand spindle, including Husqvarna 135R, 323R, 333R, 335FR, and common 25cc–35cc commercial trimmers.
Q: What line shapes run through this head?
A:It feeds round, square, star-edge, and spiral low-noise nylon line in 2.0 mm, 2.4 mm, and 2.7 mm diameters.
Q: How is the product packed for volume orders?
A:Individual heads are polybagged and boxed in master export Cardboard packaging. Standard production lead time is 30 Days.
Hot Tags: brush cutter t35 trimmer head, China brush cutter t35 trimmer head suppliers, RK 15HU Carburetor Repair Kit, 937 05145 679CC Brush Cutter Air Filter, 1L Fuel Tank Mixer, other brush cutter parts, Brush Cutter Overflow Valve Needle Valve, Fuel Tank Mixer 1L Ratio 20 1 50 1

