Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of 12” high branch saw guide bar in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
12" High Branch Pole Saw Guide Bar (3/8" LP / .050")
Laminated Sprocket Nose Guide Bar for Pole Pruners and Compact Saws

Product Introduction
This 12-inch guide bar is engineered for commercial pole pruners, multi-function brush cutter pole saw attachments, and compact top-handle arborist chainsaws. It provides smooth, stable chain guidance when pruning high tree limbs, thinning orchard branches, and cutting firewood.
The body is stamped from 65MnA alloy spring steel to provide high bend recovery, preventing permanent deformation if the bar gets pinched in a falling branch. The guide rails undergo high-frequency induction hardening to HRC 55–56, resisting rail spread and wear caused by high-speed saw chains running at 15–20 m/s.
The nose features a small-radius 4-rivet sprocket that reduces the rotational drag on small displacement engines (25cc to 43cc). The compact nose radius minimizes the kickback hazard zone, providing safe and controllable cutting when reaching into overhead tree canopies.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product | 12" Pole Saw Guide Bar |
| SKU | 3301003 |
| Brand | SeaSummer |
| Bar Length | 12 Inches (30 cm) |
| Chain Pitch | 3/8" LP (Low Profile) / Optional 1/4" |
| Groove Gauge | .050" (1.3 mm) / .043" (1.1 mm) |
| Drive Link Count | 44 DL / 45 DL (depending on sprocket size) |
| Tail Mount Pattern | A041 / A095 Standard Mounting Slot |
| Body Material | 65MnA Laminated Alloy Spring Steel |
| Rail Hardness | HRC 55 to 56 (Induction Hardened) |
| Nose Construction | 4-Rivet Small Radius Sprocket Nose |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Pre-Assembly Checks
Check the groove width with a feeler gauge (.050" or .043") and spin the nose sprocket by hand to confirm smooth, unhindered rotation. Ensure the oiler hole is clear of protective lacquer.

Mounting Steps
Fit the saw chain around the drive sprocket and into the guide bar groove, ensuring cutter teeth point forward along the top rail.
Slide the bar tail slot over the mounting studs and engage the chain tensioner pin in the lower bar hole.
Install the side clutch cover and finger-tighten the bar nut.
Lift the bar nose upward while turning the tensioning screw clockwise until the chain drive links seat snugly into the bottom rail.
Tighten the bar nut securely to 10–12 N·m. The chain should pull smoothly around the bar by hand with about 2–3 mm of flex when pulled down at mid-span.

Maintenance for Longer Bar Life
Flip the guide bar symmetrically every 8–10 hours of cutting to ensure even rail wear, and clear accumulated wood sawdust from the oil inlet hole before each refueling.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:Which pole saw attachments and powerheads fit this 12" bar?
A: It fits multi-attachment brush cutters (such as CG260, CG330, CG430 pole saw heads), Husqvarna pole pruners, Echo power pruners, and compact chainsaws using A041 or A095 bar mounting patterns.
Q: How many chain drive links (DL) are required for this 12" bar?
A:Standard 12" A041/A095 setups use 44 drive links (44DL) or 45 drive links (45DL) of 3/8" LP chain, depending on the drive sprocket tooth count.
Q: Why is rail flipping recommended?
A:Because high-branch under-cutting and top-rail cutting concentrate pressure on one side, flipping the bar top-to-bottom distributes wear equally across both rails, doubling service life.
Q: What are the bulk export packaging details and delivery terms?
A:Bars are wrapped in protective sleeves and boxed in master export Cardboard packaging. Standard production and delivery lead time is 30 Days.
Hot Tags: 12” high branch saw guide bar, China 12” high branch saw guide bar suppliers, 2 4mmX15mTrimmer Line Dual Round, 2 4mmX166m Trimmer Line Dual Color Square, 2 7mmX15m Trimmer Line 0 105 Dual Round, 3 0mmX15m Trimmer Line Twist, T25 Brush Cutter Trimmer Head, 2 7mmX15m Trimmer Line 0 105 Square

