Chain Saw Carburetor For 5200

Chain Saw Carburetor For 5200

SKU: 0118433
Carburetor Type: All-position diaphragm pump and metering carburetor (MP16 / WT type)
Adjustment Needles: High-speed (H) needle, Low-speed (L) needle, Idle speed (T) stop screw
Housing Material: Anodized die-cast aluminum with composite fuel-resistant diaphragms
Engine Matching: 45cc, 52cc, 58cc 2-stroke chainsaws (4500 / 5200 / 5800 series)
Commercial Terms: Brand: SeaSummer | Delivery Time: 30 Days | Packaging: Cardboard packaging
Send Inquiry
Add To Inquiry
Description

Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of chain saw carburetor for 5200 in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.

 

Product Overview & Operating Details

5200 Chainsaw Diaphragm Carburetor Assembly

All-Position Fuel Metering Carburetor for 45cc–58cc 2-Stroke Chainsaws

 
 
product-1024-1024

Product Introduction

This diaphragm carburetor assembly is engineered for 4500, 5200, and 5800 series (45cc to 58cc) two-stroke gasoline chainsaws. It provides continuous, pressurized fuel delivery and atomization across all operating angles, preventing engine lean-out or stalling during horizontal felling and limbing cuts.

The unit utilizes crankcase pressure pulses to drive an internal fuel pump diaphragm, drawing fuel from the tank without relying on gravity. A secondary metering diaphragm and needle valve regulate fuel flow into the venturi throat according to engine load and throttle position. Independent high-speed (H) and low-speed (L) needle valves with tension springs allow precise mixture adjustment for regional fuel blends, operating altitudes, and temperature variations.

The carburetor body is precision die-cast from aluminum with an anodized surface treatment to resist ethanol corrosion. It comes pre-assembled with a brass throttle butterfly valve, choke plate, integrated return springs, and brass fuel inlet fitting for direct bolt-on installation onto standard 45/52/58cc intake insulator blocks.

 

 

 

Technical Specifications

 

 

Parameter Specification
Product Chain Saw Carburetor For 5200
SKU 0118433
Brand SeaSummer
Cross Reference MP16, MP16-7, WT-856 (Walbro WT Series), 848C80810
Carburetor Type All-Position Diaphragm Pump & Metering
Body Material Anodized Die-Cast Aluminum Alloy
Diaphragms Fuel-Resistant Composite Polymer / Teflon
Adjustment Needles H (High-Speed) / L (Low-Speed) / T (Idle Stop)
Mounting Hardware 2-Bolt M5 Flange Pattern (3.5–4.5 N·m)
Engine Compatibility 45cc–58cc 2-Stroke Chainsaws (4500, 5200, 5800 Models)
Delivery Time 30 Days
Packaging Cardboard packaging
   

 

Products Application

 

 

product-816-816

Pre-Installation Checks

Inspect the throttle and choke shafts for smooth spring-loaded return. Verify that the factory base settings for both H and L needles are backed out approximately 1.25 to 1.5 turns from lightly seated.

product-816-816

Mounting Steps

Inspect the intake insulator manifold block for cracks and ensure the pulse channel hole is clean and unobstructed.

Install a fresh mounting gasket, making sure the pulse hole in the gasket aligns perfectly with the pulse port on both the manifold and carburetor body.

Connect the throttle linkage rod to the throttle lever arm and attach the fuel supply line to the brass inlet nipple.

Fasten the two M5 through-bolts evenly to 3.5–4.5 N·m. Do not over-torque to avoid cracking the plastic intake block.

product-816-816

Engine Tuning

Warm the engine up for 2–3 minutes. Set the idle speed screw (T) to approximately 2,800–3,200 RPM (chain stationary), then fine-tune the high-speed needle (H) so the engine four-strokes slightly at wide-open throttle (11,500–12,500 RPM) and cleans up under cutting load.

Quality and Craftsmanship Details

 

product-1500-1500

 

 

 

Products Package

 

 

product-1500-1500

 

About Us

 

 

Jiaxing Norsun Trading Co., Ltd.

As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.

One-Stop Sourcing Hub

YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS

Direct Factory Network

200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA

Production process

 
product-496-372
Injection MoldingPlastic & Rubber Parts
product-496-372
CNC Lathe TurningHigh-Precision OD/ID
product-496-372
CNC Machining CenterMulti-Axis Milling
-5
Precision TappingCalibrated Thread Pitch
product-496-372
Clean Assembly LineSemi-Automated Line
product-496-372
100% QC InspectionOptical & Pressure Test
product-496-372
Protective PackagingCardboard & Rust-Proof
-6
Warehouse & LogisticsFast Dispatch & Storage

Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing

 

Expo experience

 

 

product-1500-2000

 

Customer Reviews

 

 

product-1500-2000

 

 

Practical Questions & Ordering

 

 

Q:What are the baseline needle settings for this 5200 carburetor?

A:Turn both the High (H) and Low (L) screws gently clockwise until lightly seated, then back each screw out counter-clockwise 1.25 to 1.5 turns as a baseline starting point.

Q: Which chainsaw engines are compatible with this carburetor?

A:It fits 45cc, 52cc, and 58cc two-stroke chainsaws (models 4500, 5200, 5800), including Tarus, Sanli, Viron, and universal Chinese 5200 chainsaws using MP16 or Walbro WT-style mounts.

Q: Why does the saw refuse to pull fuel after installing a new carburetor?

A:The most common cause is a misaligned intake gasket blocking the crankcase pulse hole, preventing the internal fuel pump diaphragm from pulsing and drawing fuel from the tank.

 

Q: What are the bulk export packaging details and delivery terms?

A:Carburetors are individually boxed inside protective inner packaging and packed into master export Cardboard packaging. Standard production lead time is 30 Days.

 

 

 

 

Hot Tags: chain saw carburetor for 5200, China chain saw carburetor for 5200 suppliers, 5800 Oil Sump, 4500 5200 5800 parts, 5200 5800 Clutch Remover Tools, 4500 5200 Fuel Hose

Send Inquiry