Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of chain saw drum needle cage in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
Chainsaw Clutch Drum Needle Bearing Assembly
Radial Roller Bearing Cage for 2500–6200 Chainsaw Clutch Sprockets

Product Introduction
This needle roller bearing assembly supports the clutch drum and drive sprocket on gasoline chainsaw crankshafts. Positioned over the crankshaft output journal, it allows the sprocket and saw chain to remain stationary when the engine is idling, then supports high radial cutting loads once the centrifugal clutch expands at operating speeds.
The bearing uses cylindrical rollers made of GCr15 high-carbon chromium bearing steel, heat-treated to HRC 60–64 and ground to a surface finish of Ra ≤ 0.2 μm. A stamped alloy steel cage retains and spaces the rollers uniformly around the shaft, preventing roller tilt and friction build-up at speeds up to 12,000 RPM.
Maintaining true concentric alignment between the crankshaft extension and the sprocket bore prevents idle chain drag, protects crankshaft snouts from metal-on-metal grooving, and extends sprocket life. Bearings are shipped packed in protective plastic storage sleeve sticks for clean storage and rapid workshop access.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product | Chain Saw Drum Needle Cage |
| SKU | 0118286 |
| Brand | SeaSummer |
| Bearing Type | Radial Needle Roller and Cage Assembly |
| Standard Sizes | 10×13×10 mm / 10×16×12 mm / 10×16×13 mm (d × D × B) |
| Inner Bore Diameter | Φ 10.0 mm (+0.005 / +0.015 mm tolerance) |
| Roller Material | GCr15 / 100Cr6 Hardened Bearing Steel (HRC 60–64) |
| Cage Material | Stamped High-Tensile Alloy Steel |
| Maximum Speed | ≥ 12,000 RPM |
| Compatible Models | 2500, 3800, 4500, 5200, 5800, 6200 Series Chainsaws |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Pre-Assembly Inspection
Measure the inner bore and overall width with calipers. Verify that all needle rollers spin freely within their cage pockets without falling out.

Mounting Steps
Wipe the crankshaft journal clean of metal filings, old sludge, and sawdust.
Inspect the crankshaft snout for grooving or scoring; replace or polish the shaft if worn.
Apply a coat of high-temperature lithium-based grease directly to the needle rollers and crankshaft surface.
Slide the greased needle cage smoothly over the crankshaft, then install the clutch drum over the bearing.
Reinstall the thrust washer and thread the centrifugal clutch assembly onto the shaft (reverse left-hand thread).

Operational Check
Start the engine and check idle behavior. The saw chain must stay completely stopped at idle. If the chain rotates while idling with the throttle released, check the needle bearing for dry seizing or roller wear.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:What is the role of this needle bearing in a chainsaw?
A:It acts as a free-spinning rotary bearing between the crankshaft and the clutch drum when the engine is idling, ensuring the chain does not move until the operator squeezes the throttle.
Q: How do I choose the correct bearing dimensions?
A:Standard 2-stroke chainsaws (2500 through 6200) use a 10 mm crankshaft journal. Select the outer diameter (13 mm or 16 mm) and width (10 mm, 12 mm, or 13 mm) that match the internal hub bore of your clutch drum or spur sprocket.
Q:Can this bearing be installed without grease?
A:No. Always lubricate the needle rollers with high-temperature bearing grease prior to installation. Running the bearing dry will lead to rapid roller overheating, cage failure, and crankshaft snout scoring.
Q: What are the bulk export packaging details?
A:Bearings are packaged in protective plastic storage sleeve sticks (10 pcs per sleeve), boxed in quantities, and packed into master export Cardboard packaging. Standard production lead time is 30 Days.
Hot Tags: chain saw drum needle cage, China chain saw drum needle cage suppliers, 5800 Oil Sump, 4500 5200 5800 parts, 5200 5800 Clutch Remover Tools, 4500 5200 Fuel Hose

