Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of hus51 cylinder assy 45mm in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
Husqvarna 51 / 55 45mm Chainsaw Cylinder Kit
Top-End Replacement Assembly for 51cc Husqvarna Chainsaws

Product Introduction
This 45mm cylinder and piston rebuild kit fits Husqvarna 50, 51, and 55 two-stroke chainsaws. It replaces worn, scored, or heat-damaged top-end parts to restore engine compression and power.
The cylinder is cast from aluminum alloy with cooling fins and a plated (Chrome/Nikasil) interior running surface. The set includes a 45mm piston, a 45mm × 1.5mm ring, a 10mm wrist pin, two circlips, a needle bearing, and cylinder base and exhaust gaskets. An M10 port on the cylinder shoulder accepts a decompression valve or the included plug.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product | HUS51 Chainsaw Cylinder Piston Assembly |
| SKU | 0115066 |
| Brand | SeaSummer |
| Bore Size | 45.0 mm |
| Piston Ring | 45 mm × 1.5 mm |
| Wrist Pin | 10.0 mm |
| OEM Cross Ref | 503 16 83-01 / 505 10 85-02 |
| Engine Models | Husqvarna 50, 50 Special, 51, 55 |
| Bore Plating | Hard Chrome / Nikasil |
| Casting Material | ADC12 Die-Cast Aluminum |
| Piston Alloy | High-Silicon Aluminum |
| Decomp Port | M10 × 1.0 (Plug Included) |
| Kit Includes | Cylinder, Piston, Ring, Pin, 2 Circlips, Needle Bearing, Decomp Plug, Base & Muffler Gaskets |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Ring Check
Slide the piston ring into the cylinder bore and verify that the end gap measures 0.20–0.35 mm with a feeler gauge.

Assembly Steps
Fit the needle bearing into the connecting rod and lubricate with clean two-stroke oil.
Mount the piston with the arrow on the top facing the exhaust side.
Push the wrist pin through and lock both circlips in their grooves with end gaps facing down.
Place the base gasket on the clean crankcase surface.
Close the ring over its locating pin and slide the oiled cylinder down over the piston.
Torque the four cylinder base bolts across corners to 9.0–11.0 N·m.

Break-In
Use a 25:1 fuel-to-oil mixture for the first two tanks of fuel, cutting at varying engine speeds.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:Will this 45mm kit fit on a Husqvarna 50?
A:Yes. The 50, 51, and 55 use the same crankcase bolt pattern and stroke, making this a direct bolt-on fit.
Q: What causes piston and cylinder scoring?
A:Running without sufficient two-stroke oil, an overly lean carburetor adjustment, or air entering through bad crank seals or split intake boots.
Q: Is a decompression valve required?
A:No. If your saw does not use a decompression valve, use the included M10 blind plug to seal the port.
Q:What is the packaging and lead time?
A:Individual boxed kits packed in master Cardboard packaging. Standard production lead time is 30 Days.
Hot Tags: hus51 cylinder assy 45mm, China hus51 cylinder assy 45mm suppliers, HUS55 Choke Rod

