Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of ts420 starter pulley in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
STIHL TS410 / TS420 Recoil Starter Pulley & Rope Rotor
New-Style High-Hub Starter Pulley for 66.7cc Cutquik Power Cutters (OEM 4238 190 1001)
Product Introduction
Concrete cutting and road construction expose two-stroke equipment to constant abrasive slurry, fine silica dust, and abrupt pull-cord shocks. On STIHL TS410 and TS420 power cutters, frequent full-compression pull starts gradually wear down the starter rope channel and stress the central hub, leading to rope binding, sluggish recoil return, or off-center hub play that damages the rewind spring.
This replacement starter rope rotor is engineered specifically for the newer-generation STIHL TS series cut-off saw platform. Molded from reinforced, impact-modified engineering polymer (PA66-GF grade) and fitted with a precision-machined brass central guide bushing, it resists abrasive particle scouring and thermal deformation while maintaining smooth rotational alignment under repetitive high-force pull cycles.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Cut-Off Saw Recoil Starter Pulley / Rope Rotor |
| SKU | 0120036 |
| Brand | SeaSummer |
| Primary OEM Reference | 4238 190 1001 (42381901001) |
| Cross References | Stens 150-376 / 4002 710 2108 |
| Old-Style Reference (Non-Interchangeable) | 4223 190 1001 (Short Hub Profile for TS400) |
| Compatible Machines | STIHL TS410, TS420, TS480i, TS500i (New-Style Starter Assembly) |
| Center Hub Design | Taller Center Hub with Integrated Brass Wear Bushing |
| Pulley Material | Impact-Modified, Heat-Resistant High-Grade Engineering Polymer |
| Center Insert Material | Machined Brass Alloy Sleeve |
| Unit Weight | Approx. 77 g (0.17 lb) |
| Matching Rewind Spring | OEM 4238 190 3000 |
| Working Temperature Range | -30°C to +120°C |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Hub Verification & Pre-Assembly Check
Before installation, verify the center hub height against your original starter housing. This pulley utilizes the new-style taller center hub configuration (OEM 4238 190 1001) and is not interchangeable with the early TS400 short-hub style (OEM 4223 190 1001). Inspect the rope channel for smooth travel and ensure the brass center sleeve is clean and free of abrasive grit.

Step-by-Step Assembly Procedure
Remove the recoil starter cover from the cut-off saw and release all remaining spring tension.
Unthread the retaining screw, thrust washer, and starter pawl components; lift out the old worn pulley.
Clean all dried slurry, dust, and debris from the starter housing cavity and rewind spring pocket.
Lightly lubricate the starter post and inner brass bushing with non-resinous workshop grease.
Thread a new starter rope through the rotor eyelet, tie a secure figure-eight knot, and seat the knot flush into the rotor recess.
Align the rotor rear hook with the inner loop of rewind spring (OEM 4238 190 3000) and seat the rotor squarely onto the starter post.
Reinstall the pawl, washer, and center screw. Pre-tension the rewind spring by rotating the pulley 3 to 4 turns counter-clockwise before feeding the cord through the starter rope guide.

Maintenance Best Practices
Whenever servicing the starter pulley, inspect the starter pawls, starter rope, and rewind spring simultaneously. Replacing worn starter components as a matched assembly eliminates cord backlash, protects the flywheel engagement teeth, and guarantees quick engine ignition on heavy demolition worksites.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:Is this pulley compatible with older STIHL TS400 power cutters?
A: No. The TS400 and early production TS410 units utilize a shorter center hub (OEM 4223 190 1001). This pulley features the updated taller hub profile (OEM 4238 190 1001) designed for current TS410, TS420, TS480i, and TS500i starter housings.
Q: What causes starter pulleys to crack or fail prematurely on cut-off saws?
A:Heavy concrete slurry entering the recoil housing acts as an abrasive grinding compound. Coupled with incorrect spring pre-tensioning or pulling the cord to its absolute mechanical stop, the center hub can split or wear out of round.
Q: Does this pulley come with the brass center insert pre-fitted?
A:Yes. The machined brass bushing is molded directly into the central bore to ensure accurate shaft alignment, low friction, and extended service life.
Q: What are the standard wholesale packaging details and lead times?
A:Pulleys are packed individually in protective polybags and packed into export-grade master Cardboard packaging. Standard production delivery time is 30 Days.
Hot Tags: ts420 starter pulley, China ts420 starter pulley suppliers, TS420 Crankshaft, TS420 Starter Pulley, TS420 Starter Pawl Sets 3pcs, TS420 Gasket, TS420 Piston Needle 10X14X13, TS420 Oil Seal 15X24X7 13 9X26 2X6 8

