Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of 192f connecting in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
192F / 195F Diesel Engine Connecting Rod Assembly
High-Fatigue Forged Alloy Steel Connecting Rod with Lubricated Bronze Wrist Pin Bushing

Product Introduction
Handling the massive firing loads of a 500cc+ single-cylinder diesel engine places enormous repetitive tensile and compressive forces on the connecting rod. When 192F or 195F generator sets operate under sustained electrical demand, inferior cast rods or low-grade forgings develop big-end journal distortion, leading to oil film breakdown, spun rod bearings, small-end wrist pin scuffing, and catastrophic engine seizure.
This heavy-duty connecting rod assembly is precision die-forged from high-grade alloy steel to provide unyielding mechanical rigidity. Designed with an optimized I-beam profile, precision-honed bearing saddle with matched cap serrations, and an interference-fitted bronze small-end bushing with oil feed channels, it delivers exceptional structural stability and dynamic weight balance for smooth engine harmonics under full electrical load.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Heavy Diesel Engine Connecting Rod Assembly |
| SKU / Type No. | 1608430 |
| Brand | SeaSummer |
| Compatible Engine Models | 192F, 192FA, 195F (12HP–14HP / 498cc–532cc Single-Cylinder Diesel) |
| Target Machinery Platforms | 7.5kW to 9kW Diesel Generating Sets (Open-Frame & Silent Canopy), Rotary Tillers |
| Manufacturing Process | Closed-Die Forged High-Strength Alloy Steel (I-Beam Shank Cross-Section) |
| Surface Engineering | Manganese Phosphating Treatment (Anti-Corrosion & Oil-Varnish Resistant) |
| Small-End Bearing | Press-Fitted High-Load Wear-Resistant Bronze Bushing (with Oil Feed Channel) |
| Big-End Journal Structure | Precision-Split Matched Bearing Saddle with Precision Locating Serrations |
| Fastener Specification | Matched Pair of High-Tensile Grade Connecting Rod Bolts and Flange Nuts |
| Balancing Standards | Precision Weight-Matched to Minimize Single-Cylinder Reciprocating Vibration |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Bore Geometry & Alignment Verification
Measure the big-end bearing bore and small-end bronze bushing inner diameter using an internal dial bore gauge to verify circularity and zero taper. Check that the stamped matching pair numbers on the big-end cap and rod shank are perfectly aligned.

Assembly & Torque Instructions
Thoroughly degrease and dry the crankshaft crankpin and connecting rod bearing saddle.
Fit new matched connecting rod bearing shells, verifying that the locating lugs lock firmly into the machined rod and cap notches.
Apply generous amounts of clean engine assembly lubricant to the crankpin journal and bearing shells.
Slide the small-end bronze bushing over the piston wrist pin, confirming smooth pivoting action without axial binding.
Place the big-end cap onto the crankpin, ensuring matching orientation numbers face the same direction.
Lubricate the high-tensile bolt threads and tighten progressively in alternating diagonal steps to factory torque specification. Rotate the crankshaft by hand through 360 degrees to verify completely bind-free rotation.

Workshop Maintenance & Replacement Rules
Scrapping Threshold: Discard the connecting rod immediately if thermal discoloration (blue/black annealing) is visible on the big-end bore due to oil starvation, if the rod beam shows lateral bend, or if the small-end bronze bushing exceeds allowable clearance.
Fastener Replacement: Never reuse connecting rod bolts that show thread stretch or necking distortion.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:Is this connecting rod suitable for both 192F and 195F diesel generator engines?
A: Yes. It is manufactured to universal 192F/192FA/195F crankshaft journal and piston wrist pin specifications for 12HP–14HP (498cc–532cc) heavy single-cylinder diesel engines.
Q: Does this assembly come with the small-end bronze bushing pre-installed?
A:Yes. The high-load wear-resistant bronze wrist pin bushing is factory press-fitted, precision-reamed to final tolerance, and drilled with oil feed ports for immediate drop-in assembly.
Q: Why is forged alloy steel preferred over cast iron for diesel connecting rods?
A:Diesel engines operate at extreme cylinder firing pressures (~18:1 to 20:1 compression ratio). Forged alloy steel offers vastly superior tensile yield strength, fatigue endurance, and impact ductility compared to brittle cast iron.
Q: What are the wholesale export packing details and standard lead time?
A:Connecting rods are dipped in anti-rust oil, wrapped in VCI protective film inside individual cartons, and packed into master export Cardboard packaging. Standard production delivery time is 30 Days.
Hot Tags: 192f connecting, China 192f connecting suppliers, 192F Generator Engine, 192F Connecting, 192F Generator Motor, 192f 195f parts, 192F 14HP Intake Exhaust Valve

