2.5KW/2500W Generator Switch

2.5KW/2500W Generator Switch

SKU / Type No.: 1609108
Generator & Engine Fitment: 2.0KW–2.8KW (Nominal 2.5KW / 2500W) Portable Generators with 168F, 170F, GX160, GX200 (5.5HP–7.0HP / 163cc–212cc) Small Engines
Dual-Function Control: Progressive Rotary Throttle Speed Lever + Center Red Emergency Ignition Kill Push Button
Electrical Interface: Integrated Insulated Copper Grounding Lead Wire with Bullet Quick-Connect Terminal
Commercial Terms: Brand: SeaSummer | Delivery Time: 30 Days | Packaging: Cardboard packaging
Send Inquiry
Add To Inquiry
Description

Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of 2.5kw/2500w generator switch in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.

 

Product Overview & Operating Details

2.5KW / 2500W Portable Generator Throttle & Engine Stop Control Switch Assembly

Integrated Throttle Speed Regulator & Emergency Flameout Kill Button with Grounding Wire Harness

 
 
product-1024-1024

Product Introduction

Reliable speed regulation and instantaneous engine shutdown are vital for the safe operation of portable utility generators. On 2.5KW generator sets powered by GX160 or 168F/170F engines, worn throttle friction discs or corroded ignition kill switches cause erratic engine hunting under load, accidental engine shutoffs during vibration, or complete failure to ground the ignition coil when emergency shutdown is required.

This integrated generator control switch combines rotary governor speed adjustment with an immediate-action emergency flameout button in a single rugged assembly. Manufactured from impact-modified, heat-resistant engineering polymer with an anti-loosening threaded mounting stud, internal arc-resistant copper contact points, and an insulated grounding lead with bullet terminal, it provides positive, tactile engine speed control and dependable ignition shutdown.

 

 

 

Technical Specifications

 

 

Parameter Specification
Product Name Generator Engine Throttle & Flameout Control Switch
SKU / Type No. 1609108
Brand SeaSummer
Compatible Generator Capacity 2.0KW to 2.8KW (Nominal 2.5KW / 2500W Generating Sets)
Compatible Engine Models 168F, 170F, GX160, GX200 (5.5HP to 7.0HP / 163cc to 212cc Engines)
Machinery Applications Portable Gasoline Generators, Power Tillers, Pressure Washers, Water Pumps
Switch Functions Dual Control: Rotary Throttle Speed Adjustment + Red Center Emergency Stop Button
Housing Construction High-Impact Fuel & UV Resistant Engineering Thermoplastic with Metal Stud
Electrical Contacts Arc-Resistant Copper Alloy Internal Grounding Contact Points
Wiring Connection High-Flexibility Insulated Single-Core Lead Wire with Male Bullet Connector
Mounting Interface Threaded Central Pivot Stud with Retention Hardware (Direct Bracket Fit)
Mechanical Detent Clear Multi-Stage Resistance for Smooth, Stable Speed Holding
Delivery Time 30 Days
Packaging Cardboard packaging

 

Products Application

 

 

product-816-816

Lever Detent & Grounding Terminal Inspection

Rotate the black throttle lever through its full arc to verify smooth friction resistance and check that the center red stop button depresses and springs back cleanly. Test continuity between the bullet wire terminal and the ground contact plate using a digital multimeter while pressing the red button.

product-816-816

Step-by-Step Installation Guidelines

Shut down the engine and disconnect the spark plug boot before servicing engine controls.

Unfasten the retaining nut from the governor control bracket and disconnect the old stop wire.

Mount the new switch assembly onto the governor control baseplate, passing the central threaded stud through the bracket hole.

Tighten the locknut to achieve firm mounting tension without over-compressing the rotary friction plate.

Plug the black insulated lead wire bullet terminal firmly into the engine ignition coil primary ground lead.

Connect the mechanical throttle linkage wire into the lever swivel arm and test full throttle range from idle to rated generator speed.

product-816-816

Operating & Safety Best Practices

Emergency Shutdown: In the event of an electrical short, fuel leak, or excessive RPM surge, immediately press the center red button or swing the lever fully to the STOP detent to ground the ignition coil and halt combustion instantly.

Troubleshooting: If the engine refuses to shut off when pressing the stop button, check the black bullet wire connection for loose terminal seating or wire pinching against the engine block.

Quality and Craftsmanship Details

 

product-1500-1500

 

 

 

Products Package

 

 

product-1500-1500

 

About Us

 

 

Jiaxing Norsun Trading Co., Ltd.

As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.

One-Stop Sourcing Hub

YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS

Direct Factory Network

200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA

Production process

 
product-496-372
Injection MoldingPlastic & Rubber Parts
product-496-372
CNC Lathe TurningHigh-Precision OD/ID
product-496-372
CNC Machining CenterMulti-Axis Milling
-5
Precision TappingCalibrated Thread Pitch
product-496-372
Clean Assembly LineSemi-Automated Line
product-496-372
100% QC InspectionOptical & Pressure Test
product-496-372
Protective PackagingCardboard & Rust-Proof
-6
Warehouse & LogisticsFast Dispatch & Storage

Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing

 

Expo experience

 

 

product-1500-2000

 

Customer Reviews

 

 

product-1500-2000

 

 

Practical Questions & Ordering

 

 

Q:Is this control switch suitable for both GX160 and GX200 2.5KW generators?

A: Yes. It features universal mounting stud dimensions and wire connections compatible with Honda GX160/GX200 and Chinese 168F/170F small engines across all standard 2.0KW–2.8KW generator models.

Q: How does the emergency stop button halt the engine?

A:Pressing the red button mechanically closes the internal copper contact to the chassis ground, shorting out the primary ignition coil signal and instantly extinguishing spark at the spark plug.

Q: Can the throttle lever hold its position under engine vibration?

A:Yes. The central pivot assembly utilizes calibrated friction discs that prevent vibration creep, maintaining steady generator RPM and 50/60Hz output frequency under continuous load.

 

Q: What are the wholesale export packing details and standard lead time?

A:Switches are packed in individual protective bags inside master export Cardboard packaging. Standard production delivery time is 30 Days.

 

 

 

 

Hot Tags: 2.5kw/2500w generator switch, China 2.5kw/2500w generator switch suppliers, GX50 Piston Kit 43mm, KI DAVR 95S3 Generator AVR, other diesel generator parts

Send Inquiry