Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of diesel engine zs1115 regulating shaft in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
ZS1115 / S1115 Industrial Diesel Engine Governor Regulating Shaft
Precision Induction-Hardened Alloy Steel Governor Gear Axis with Cross-Drilled Oil Ducts for 20HP–24HP Generator Sets & Agricultural Powerplants

Mechanical Speed Regulation & Load Compensation
In large-displacement single-cylinder diesel engines rated from 20HP to 24HP, sudden mechanical or electrical load fluctuations-such as turning on heavy industrial motors or deep agricultural soil engagement-demand immediate fuel rack compensation. The mechanical governor regulating shaft forms the critical kinematic axis linking the high-speed centrifugal flyweights with the high-pressure fuel injection pump control rack.
Subjected to high-frequency engine vibration and continuous rotational oscillation inside the timing gear casing, soft or unhardened replacement shafts develop micro-fretting grooves and stepped wear. This mechanical drag creates severe governor hysteresis, triggering engine RPM hunting, electrical frequency surging on generator sets, and in severe cases, catastrophic governor lock-up causing engine overspeed.
Engineered to restore razor-sharp governor response, this ZS1115 regulating shaft is machined from high-tensile alloy steel treated with precision induction case hardening. The journal surface undergoes multi-pass cylindrical grinding to achieve a mirror finish and micro-tolerance concentricity, ensuring zero-friction gliding within the timing gear housing bushing. Integrated cross-drilled oil ducts direct continuous engine splash oil into the bearing interface, preventing dry friction and galling across extended high-temperature operating cycles.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Description | Diesel Engine Governor Control Shaft / Regulating Gear Axis |
| SKU / Type No. | 1609223 |
| Engine Platform Model | ZS1115 / S1115 Single-Cylinder Direct-Injection Diesel Engines (20HP–24HP) |
| Brand Identifier | SeaSummer |
| Equipment Scope | 12kW–16kW Diesel Generator Sets, Farm Tractors, Heavy Power Tillers, Pump Stations |
| Material Formulation | High-Tensile Special Alloy Steel (Induction Hardened / Carburized Case) |
| Surface Finish | Precision Cylindrical-Ground Micro-Finish with Chamfered Entry Shoulders |
| Lubrication Engineering | Integrated Cross-Drilled Oil Passages for Continuous Journal Lubrication |
| Locating Interface | Precision Machined Pin Holes & Retaining Grooves for Positive Lever Locking |
| Operating Function | Eliminates Speed Hunting, Restores Linear Governor Response, Prevents RPM Surge |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Journal Micrometer & Concentricity Verification
Thoroughly degrease the regulating shaft and inspect the bearing surface under strong light. Use an outside micrometer to measure the outer diameter along multiple points to verify roundness, zero taper, and absence of stepped grooving. Check that the oil lubrication cross-drilled holes are clean and free of metal swarf.

Assembly & Linkage Calibration Steps
Clean the timing gear housing bore and remove any old gummed oil residue or burrs from the governor bushing.
Apply a generous coat of clean engine assembly oil to the regulating shaft journal and the bushing inner diameter.
Slide the shaft smoothly into the housing bore, confirming 100% free rotational movement without axial binding or tight spots across its entire sweep range.
Align the internal governor fork and external speed setting arm with the shaft locating pin holes. Insert the high-strength locating pins and secure all retaining clips and lock nuts.
Connect the linkage fork to the fuel injection pump control rack. Manually cycle the throttle lever from idle to maximum stop to verify that the rack glides freely from zero delivery to full fuel delivery without sticking.
Check governor spring preload according to the ZS1115 factory technical manual before refitting the gear case cover.

Scrapping & Replacement Thresholds
Replace Immediately: Scrape the shaft if visible stepped wear lines can be felt with a fingernail, if the shaft shows bend distortion, or if loose locating pin holes cause excessive rotational play between the lever and internal fork.
Overhaul Rule: Always inspect the regulating shaft whenever disassembling the timing gear case during engine overhauls or following any governor runaway incident.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:Is this regulating shaft fully compatible with ZS1115 and S1115 diesel engines?
A: Yes. It is manufactured to standard industrial OEM specifications for ZS1115 and S1115 (20HP–24HP) single-cylinder direct-injection diesel engines used across heavy generators, tractors, and agricultural pump machinery.
Q: How does a precision-ground shaft prevent diesel engine hunting and surging?
A:Governor hunting is caused by frictional stick-slip in the regulating linkage. The mirror-smooth precision-ground surface and micro-tolerances ensure friction-free response to centrifugal flyweight displacement, allowing the fuel rack to adjust instantaneously and smoothly to changing loads.
Q: Does the shaft feature pre-drilled internal lubrication oil holes?
A:Yes. The shaft is precision-drilled with internal oil feed passages to ensure continuous splash lubrication between the shaft journal and the housing support bushing during engine operation.
Q: What are the wholesale export packing specifications and lead time?
A:Each regulating shaft is coated with rust-preventative oil, sealed in protective moisture-proof poly wraps inside individual labeled packaging boxes, and consolidated into export Cardboard packaging. The standard delivery lead time is 30 Days.
Hot Tags: diesel engine zs1115 regulating shaft, China diesel engine zs1115 regulating shaft suppliers, GX50 Piston Kit 43mm, KI DAVR 95S3 Generator AVR, other diesel generator parts

