Diesel Engine Oil Seal

Diesel Engine Oil Seal

SKU / Type No.: 1608292
Engine Platform Fitment: 178F / 178FA (Rated 6HP / 296cc–305cc) Single-Cylinder 4-Stroke Air-Cooled & Water-Cooled Diesel Engines
Equipment Applications: 3kW–4kW Diesel Generator Sets, Micro-Tillers, Walking Cultivators, Diesel Water Pumps, Farm Power Units
Structural Engineering: Deep-Drawn Stamped Steel Metal Skeleton Casing, High-Grade Oil-Resistant Elastomer Radial Sealing Lip, Coiled Stainless Garter Spring Ring, Secondary Dust Exclusion Lip
Commercial Terms: Brand: SeaSummer | Delivery Time: 30 Days | Packaging: Cardboard packaging
Send Inquiry
Add To Inquiry
Description

Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of diesel engine oil seal in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.

 

Product Overview & Operating Details

178F Series Diesel Engine Crankshaft Skeleton Oil Seal Assembly

High-Precision Metal Skeleton Radial Rotary Shaft Seal with Garter Spring & Dual Lip Design for 6HP / 3kW–4kW Diesel Power Units

 
 
product-1024-1024

Mechanical Function & Sealing Performance

In single-cylinder 178F diesel engines, the crankshaft rotates under continuous high combustion pressures and cyclical crankcase pressure pulses. The crankshaft oil seal serves as the primary barrier preventing engine lubricating oil from escaping through the crankcase output shaft and flywheel journals, while simultaneously defending internal bearings against airborne dirt, mud, and abrasive grit typical of agricultural and construction jobsites.

Failure of low-grade rubber seals leads to rapid oil loss, crankcase depression breakdown, abrasive journal grooving, and eventual connecting rod or main bearing seizure from oil starvation. This heavy-duty 178F crankshaft oil seal is engineered with a rigid stamped-metal outer skeleton for secure interference press-fitting into the crankcase bore, eliminating seal walk-out during thermal expansion. The primary dynamic sealing lip is supported by a precision-coiled spring steel garter ring that maintains consistent radial contact pressure across varying rotational speeds and thermal cycles. A secondary external dust wiper lip forms an impenetrable barrier against environmental contaminants.

 

 

 

Technical Specifications

 

 

Parameter Specification
Product Name Diesel Engine Crankshaft Skeleton Oil Seal Assembly
SKU / Type No. 1608292
Brand Identifier SeaSummer
Compatible Engine Series 178F / 178FA Single-Cylinder 4-Stroke Diesel Engines (6HP / 296cc–305cc)
Machinery Applications 3kW–4kW Diesel Generators, Farm Tillers, Irrigation Pumps, Agricultural Equipment
Skeleton Construction Deep-Drawn Stamped Carbon Steel Inner/Outer Metal Framework
Seal Lip Compound Premium High-Temperature Oil-Resistant Elastomer (Resistant to Thermal Aging)
Tension Spring Type Helical Coiled Spring-Steel Radial Garter Spring Ring
Lip Configuration Dual-Lip Barrier (Primary Hydrodynamic Oil Lip + Secondary Dust Exclusion Lip)
Outer Diameter Finish Precision Ground & Polymer Coated for Leak-Free Housing Interference Fit
Operating Role Prevents Crankcase Oil Leakage, Maintains Lube Pressure, Blocks Environmental Dust
Delivery Time 30 Days
Packaging Cardboard packaging

 

Products Application

 

 

product-816-816

Dimensional Verification & Lip Inspection

Before installation, use digital vernier calipers to measure the seal housing bore and verify the outer diameter and casing depth of the oil seal. Inspect the rubber sealing lip under good lighting to confirm there are no micro-tears, flash molding defects, or displaced garter springs.

product-816-816

Press-Fitting & Assembly Sequence

Ensure the engine is completely shut down and clean the crankcase seal counterbore thoroughly, removing old sealant, rust, or metal burrs.

Coat the outer metal casing lightly with clean engine oil to facilitate smooth, square insertion.

Apply a light film of clean assembly grease or engine oil directly to the rubber sealing lip and the crankshaft journal.

Use a dedicated cylindrical seal press driver sleeve matching the seal's outer diameter. Press the seal squarely into the bore using an even, perpendicular mechanical press or gentle mallet taps. Never strike the inner sealing lip or center spring directly.

If sliding over a keyed or splined crankshaft shaft extension, cover the sharp keyway edges with protective tape or a conical plastic guide sleeve to prevent slicing the seal lip.

Verify that the seal sits flush with the crankcase face and that the garter spring remains firmly seated in its retention groove.

product-816-816

Maintenance & Replacement Thresholds

Immediate Replacement: Replace the crankshaft oil seal immediately whenever engine oil weeping or wet dust buildup is noticed around the flywheel side or PTO shaft, or during any major crankshaft, bearing, or engine overhaul.

Overheating Distortion: Discard and replace hardened, brittle, or cracked seals resulting from severe engine thermal overload.

Quality and Craftsmanship Details

 

product-1500-1500

 

 

 

Products Package

 

 

product-1500-1500

 

About Us

 

 

Jiaxing Norsun Trading Co., Ltd.

As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.

One-Stop Sourcing Hub

YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS

Direct Factory Network

200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA

Production process

 
product-496-372
Injection MoldingPlastic & Rubber Parts
product-496-372
CNC Lathe TurningHigh-Precision OD/ID
product-496-372
CNC Machining CenterMulti-Axis Milling
-5
Precision TappingCalibrated Thread Pitch
product-496-372
Clean Assembly LineSemi-Automated Line
product-496-372
100% QC InspectionOptical & Pressure Test
product-496-372
Protective PackagingCardboard & Rust-Proof
-6
Warehouse & LogisticsFast Dispatch & Storage

Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing

 

Expo experience

 

 

product-1500-2000

 

Customer Reviews

 

 

product-1500-2000

 

 

Practical Questions & Ordering

 

 

Q:Is this oil seal compatible with standard 178F and 178FA diesel engines?

A: Yes. It is manufactured to exact dimensional tolerances for 178F and 178FA (6HP / 296cc–305cc) single-cylinder industrial diesel engines widely utilized across portable generators, micro-tillers, and water pumps.

Q: What is the advantage of the metal skeleton and internal garter spring?

A:The rigid metal skeleton ensures an immovable interference fit inside the aluminum or cast iron crankcase housing without warping. The spring-steel garter ring maintains active radial pressure around the spinning crankshaft journal, compensating for shaft eccentricity and thermal expansion.

Q: Can this oil seal be installed on both the flywheel side and PTO output side?

A:Depending on the specific 178F crankcase casting variant, please confirm the shaft journal and bore dimensions. This standard 1608292 specification is built for 178F crankshaft main journal sealing positions.

 

Q: What are the wholesale export packing details and standard lead time?

A:Oil seals are packaged in sealed corrosion-resistant poly packs of 10 or 20 units inside labeled inner boxes, then consolidated into master export Cardboard packaging. Standard production delivery time is 30 Days.

 

 

 

 

Hot Tags: diesel engine oil seal, China diesel engine oil seal suppliers, GX50 Piston Kit 43mm, KI DAVR 95S3 Generator AVR, other diesel generator parts

Send Inquiry