Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of et950 gasoline generator gasket set in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
Yamaha ET950 / ET650 2-Stroke Generator Full Engine Gasket Overhaul Set
Precision Die-Cut Non-Asbestos & Metal Composite Gasket Rebuild Pack with Cylinder Head Gasket, Base Gasket, Crankcase Seal & Intake/Exhaust Gaskets for 63cc (650W–1000W) Generators

Mechanical Role & 2-Stroke Crankcase Sealing Dynamics
In small 63cc 2-stroke utility engines (such as those powering Yamaha ET950, ET650, and 1E45F portable generators), the crankcase serves as a dynamic primary pre-compression pump. During the piston upward stroke, fresh air-fuel-oil mixture is drawn through the reed valve into the crankcase, and during the downward stroke, it is pre-compressed before transferring into the combustion chamber.
Any vacuum leak or positive pressure loss across the crankcase split line, cylinder base, or carburetor intake flange disrupts the delicate 2-stroke scavenging pressure. False air leaks create dangerously lean air-fuel ratios that cause RPM hunting, hard starting, and rapid piston crown seizure. At the same time, blown cylinder head gaskets cause immediate loss of combustion compression.
This complete ET950 engine overhaul gasket set provides exact factory-profile sealing across every stationary mating interface. The high-density composite metal cylinder head gasket withstands peak combustion temperatures and pressures, while precision-stamped non-asbestos fiber gaskets seal the crankcase split, cylinder base, and intake tract against fuel-oil wash. An exhaust flange gasket and rotary crankshaft oil seal complete the kit, preventing leaks and restoring stable power output.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Description | 2-Stroke Generator Full Engine Gasket Overhaul Rebuild Set |
| SKU / Part Code | 1607058 |
| Card Marking | MODEL: ET950 |
| Brand Identifier | SeaSummer |
| Compatible Generators | Yamaha ET950, ET650, TG950, IE800 & 1E45F (63cc) 2-Stroke Engines |
| Power Output Rating | 650W / 800W / 950W / 1000W Portable Generator Sets |
| Primary Gasket Materials | Metal Composite Plate, High-Grade Non-Asbestos Fiberboard, Graphite Sheet |
| Cylinder Head Gasket | Stamped Composite Metal Seal (High-Temperature & High-Pressure Combustion Proof) |
| Cylinder Base Gasket | Fuel & Oil-Resistant High-Density Fiber Gasket (Airtight Crankcase Scavenging) |
| Intake / Carburetor Pack | Carburetor Flange, Intake Manifold & Reed Valve Interface Gaskets |
| Exhaust Muffler Gasket | Reinforced High-Temp Exhaust Port Gasket (Blowout & Acoustic Leak Resistant) |
| Rotary Shaft Seal | Crankshaft Radial Oil Seal Included |
| Operational Function | Restores 2-Stroke Primary Compression, Eliminates False Air, Stops Fuel-Oil Leaks |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Pre-Assembly Dimensional Verification
Inspect the die-cut gasket profiles against the engine casing flanges to confirm that all cylinder stud holes, transfer ports, and scavenging passages align with zero edge overhang. Verify that gasket surfaces are clean, smooth, and free of creases or edge tearing.

Assembly Sequence
Clean all aluminum crankcase mating faces, cylinder base flange, and cylinder head deck using a gasket scraper and degreaser; ensure no old gasket material or burrs remain.
Install the new crankcase split gasket dry onto the engine half-casing, join the crankcase halves, and tighten the casing bolts evenly in a criss-cross pattern.
Place the new cylinder base gasket over the crankcase studs without liquid sealant.
Compress the piston rings, slide the cylinder block over the piston, and seat it firmly against the base gasket.
Place the metal cylinder head gasket onto the cylinder deck, fit the cylinder head, and torque all four head nuts progressively in a diagonal pattern to factory torque specification.
Install the reed valve block and carburetor with fresh intake gaskets; fit the muffler with the new high-temperature exhaust gasket.

Overhaul & Sealing Best Practices
Single-Use Principle: Gaskets are designed for controlled elastic and plastic compression upon initial torquing. Always discard old gaskets and install a fresh set during any engine teardown.
Avoid Excessive Liquid Sealants: Assemble intake and base gaskets dry or with a micro-thin film of oil. Never apply heavy silicone RTV in the intake tract, as excess sealant can break off and plug the carburetor main jet or prevent the reed valve from seating.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:Is this gasket set compatible with standard Yamaha ET950 and Chinese 1E45F 63cc generators?
A: Yes. The bolt hole patterns, cylinder bore opening, and transfer port cutouts are standardized for direct fitment on Yamaha ET950, ET650, TG950, and all commercial 1E45F (63cc) 2-stroke generator engines.
Q: What gaskets are included in the complete overhaul set?
A:The set contains the stamped metal cylinder head gasket, fiber cylinder base gasket, crankcase split gasket, carburetor and reed valve intake gaskets, exhaust muffler gasket, and a crankshaft oil seal.
Q: Why is airtight crankcase sealing critical on 2-stroke generators?
A:Because 2-stroke engines use the crankcase for intake fuel-air pre-compression, any air leak around the base or crankcase gaskets causes a lean air-fuel mixture, resulting in engine surging, overheating, and potential piston seizure.
Q: What are the wholesale export packing details and standard lead time?
A:Each complete gasket set is vacuum-sealed on an individual display blister card, then packed into master export Cardboard packaging. Standard production delivery time is 30 Days.
Hot Tags: et950 gasoline generator gasket set, China et950 gasoline generator gasket set suppliers, KI DAVR 95S3 AVR, BS21 18 Water Seal, gasoline generator parts, D 8011 Throttle Cable, Generator European Plug, Agriculture Sprayer Flexible Joint

