Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of generator plug in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
Portable Gasoline Generator 3-Prong Industrial Twist-Lock Power Plug (1609060)
Vibration-Proof Curved Brass Locking Male Plug with Flame-Retardant Nylon Body & Heavy-Duty Rear Strain Relief Clamp for 2kW–7.5kW Generators

Mechanical Role & Electrical Contact Dynamics
On portable gasoline generator sets powering construction jobsite equipment, emergency home transfer switches, and temporary distribution boards, electrical connections operate under continuous high-current draw and violent engine frame vibration.
Standard straight-blade plugs tend to walk loose over time under engine shaking. Loose terminal contact creates micro-arcing, localized resistance heating, terminal oxidation, melted receptacle sockets, or accidental power interruption during critical operations.
This industrial 3-prong twist-lock plug utilizes curved, heavy-gauge solid brass locking blades (Hot, Neutral, and Ground). Once inserted into the generator panel receptacle and turned clockwise, the curved prongs mechanically lock into the mating female contacts, preventing accidental pull-out and vibration-induced disconnection. The high-impact flame-retardant nylon shell isolates high voltages, while a dual-screw rear metallic strain relief clamp anchors the cable outer jacket to prevent pulling stress on the internal wire terminations.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Description | Portable Gasoline Generator 3-Prong Twist-Lock Industrial Power Plug |
| SKU / Part Code | 1609060 |
| Brand Identifier | SeaSummer |
| Applicable Generators | 2.0kW to 7.5kW Single-Phase Portable Gasoline Generator Sets |
| Blade Configuration | 3-Prong Curved Twist-Lock Design (Line + Neutral + Ground) |
| Conductive Metallurgy | High-Conductivity Solid Brass / Phosphor Bronze Contact Blades & Clamps |
| Housing Insulation | High-Impact Flame-Retardant Engineered Nylon / Insulating Composite |
| Cable Retention | Heavy-Duty Dual-Bolt Metallic Strain Relief Clamp with Rubber Grommet |
| Terminal Identification | Brass Screw = Line (L), Silver Screw = Neutral (N), Green Screw = Ground (G) |
| Operating Advantage | Vibration-Proof Mechanical Lock, Zero Accidental Pull-Out, Low Contact Resistance |
| Production Lead Time | 30 Days |
| Master Packaging | Cardboard packaging |
Products Application

Pre-Assembly Dimensional Verification
Inspect the curved brass blades to confirm thickness uniformity, smooth edge stamping, and secure anchoring within the terminal base. Check that the housing threads engage smoothly and that the rear clamp screws turn freely.

Wiring & Assembly Sequence
Loosen the housing screws and slide the rear clam-shell body and rubber grommet over the 3-conductor heavy-duty rubber power cable.
Strip approximately 45 mm of outer cable jacket and 12 mm of individual wire insulation, ensuring no copper strands are frayed or cut.
Twist the copper wire strands tightly; insert the live wire into the brass terminal (L), the neutral wire into the silver terminal (N), and the green grounding wire into the green terminal (G).
Tighten all three terminal screws firmly with an insulated screwdriver; pull each wire by hand to verify positive clamping.
Slide the outer insulating housing over the terminal block, tighten the assembly face screws, and torque the dual rear clamp bolts evenly until the rubber cable jacket is securely compressed.

Service & Electrical Safety Best Practices
Polarity Verification: Always double-check terminal polarity with a multimeter before energizing to prevent ground-neutral or line reversals.
Routine Contact Check: Inspect plug blades before each deployment. If blades show heavy pitting, discoloration from overheating, or deformation, replace the plug immediately.
Quality and Craftsmanship Details

Products Package

Practical Questions & Ordering
Q:Is this 3-prong twist-lock plug compatible with standard 2kW–7.5kW generator control panels?
A: Yes. The curved 3-prong industrial footprint is standardized for direct connection to single-phase twist-lock receptacles on 2kW to 7.5kW portable generators, transfer panels, and distribution boxes.
Q:How does the twist-lock mechanism prevent accidental disconnects?
A:Pushing the plug straight in and rotating it clockwise interlocks the curved brass tabs behind the receptacle retention contacts, holding the connection secure against engine vibration and cable pulling.
Q: What wire gauge does the terminal block accommodate?
A:The deep wire clamp pockets accept heavy-duty multi-strand copper power cables from 14 AWG to 10 AWG, matching standard generator output ampacities.
Q: What are the wholesale export packing details and standard lead times?
A:Each plug is packed in an individual carton or protective poly bag, then boxed into master export Cardboard packaging. Standard production delivery time is 30 Days.
About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Hot Tags: generator plug, China generator plug suppliers, KI DAVR 95S3 AVR, BS21 18 Water Seal, gasoline generator parts, D 8011 Throttle Cable, Generator European Plug, Agriculture Sprayer Flexible Joint

