Detailed explanation of the operation method of modern irrigation system

May 18, 2025

Leave a message

 

With the acceleration of agricultural modernization, efficient water-saving irrigation technology has become an important direction for global agricultural development. Whether it is a large farm or a small and medium-sized planting base, mastering the scientific operation method of the irrigation system can not only improve the utilization rate of water resources, but also significantly increase crop yields. This article will introduce the core operation process of the modern irrigation system in detail to help users quickly get started and optimize the use effect.

1. Preparation before starting the system

Before starting the irrigation system, the following basic inspections need to be completed:

​​Pipeline and nozzle inspection​​: Make sure that all pipes are firmly connected and there is no water leakage; adjust the nozzle angle to cover the target area to avoid repeated irrigation or omissions.
​​Filter maintenance​​: Regularly clean impurities in the filter to prevent blockage from affecting the uniformity of water flow.
​​Power supply and control system test​​: Check whether the power supply is stable, and the automatic control system (such as timer or sensor) needs to calibrate parameters in advance.
2. Irrigation mode selection and parameter setting

Modern irrigation systems usually support multiple modes, and users can flexibly adjust them according to crop types and soil conditions:

​​Drip irrigation mode​​: Suitable for fruit trees or cash crops, the dripper flow rate (usually 1-4 liters/hour) and irrigation time (recommended 1-3 hours each time) need to be set.

​​Sprinkler irrigation mode​​: Suitable for large-scale food crops, the nozzle height and rotation angle need to be adjusted according to the wind speed to avoid water evaporation loss.

​​Intelligent control mode​​: Irrigation is automatically triggered by soil moisture sensors or meteorological data. Users only need to preset thresholds (such as starting when soil moisture is less than 60%).

3. Monitoring and adjustment during operation

The following indicators need to be paid attention to in real time during system operation:

​​Water flow pressure​​: Too high pressure may cause nozzle damage, and too low pressure will affect the coverage range. It is recommended to maintain it within ±10% of the design value.

​​Energy consumption management​​: If electric drive is used, daily power consumption needs to be recorded and the operating time period needs to be optimized to reduce electricity costs.
​​Crop feedback​​: Observe the status of crop leaves. If wilting or water accumulation occurs, adjust the irrigation duration or frequency in time.
4. System maintenance and long-term optimization

Regular maintenance is the key to ensuring efficient operation of the system:

Check the sealing of pipe joints and valves every month;
Clean filters and replace worn parts every quarter;
Calibrate sensors and control systems every year to ensure data accuracy.

Through scientific operation and regular maintenance, irrigation systems can significantly improve water resource utilization efficiency and provide stable support for agricultural production. After mastering the above methods, users can further explore automation and digital upgrade solutions according to actual needs and move towards a new era of smart agriculture.

Send Inquiry