Gear Box 26mmX9T With Screw

Gear Box 26mmX9T With Screw

SKU / Model: 0202582 | Power Transmission Working Head Series
Tube & Shaft Fit: 26 mm aluminum shaft tube with 9-tooth (9T) drive shaft spline
Gear Material: Carburized 20CrMo alloy steel spiral bevel gears (HRC 52–58)
Output Thread: Standard M10 × 1.25 LH left-hand thread with blue protective rider dish
Housing & Weight: Die-cast aluminum alloy shell (Total unit net weight ~0.56 kg)
Delivery Time: 30 Days
Packaging: Cardboard packaging
Send Inquiry
Add To Inquiry
Description

Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of gear box 26mmx9t with screw in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.

 

Product Overview & Operating Details

Brush Cutter Gear Box 26mm x 9T

Aluminum Alloy Gear Head with Spiral Bevel Gears for Brush Cutters and Grass Trimmers

Brush Cutter Working Head Gear Box

 

 

product-1024-1024

20CrMo Alloy Steel Spiral Bevel Gears

The spiral bevel gears transfer power through a right-angle drive, allowing the cutting attachment to rotate at the bottom of the brush cutter shaft. The gears are specified as 20CrMo alloy steel, with carburizing and quenching used to harden the tooth surfaces while retaining a tougher inner core.

This construction is intended to withstand the repeated loads encountered during grass trimming and brush clearing. Gear life will also depend on lubrication, cutting conditions and proper machine operation.

Aluminum Alloy Gearbox Housing

The aluminum alloy housing keeps the gearbox relatively light while supporting the internal gears and bearings. It is designed to maintain the alignment of the rotating components during normal operation and helps dissipate heat generated by the gear set.

The housing also makes the unit suitable for replacement applications where weight and ease of handling are important.

26mm × 9T Mounting Interface with Grease Port

The gearbox fits a 26mm shaft tube and a compatible 9-tooth drive shaft. A locating screw positions the unit on the shaft, while two side clamp bolts secure the housing in place.

A side grease port allows routine lubrication without dismantling the entire gearbox. Check the grease condition at regular intervals and use a lubricant recommended for the gearbox and its operating conditions.

 

 

 

Technical Specifications

 

 

ITEM DETAILS
Product Name Brush Cutter Working Head Gear Box (26mm × 9T)
Product SKU 0202582
Brand SeaSummer
Housing Material High-Pressure Die-Cast Aluminum Alloy
Gear Material 20CrMo Chromium-Molybdenum Alloy Steel
Gear Hardness Carburized & Quenched (HRC 52–58)
Shaft Tube Interface 26mm Shaft Tube
Drive Shaft Interface 9-Tooth (9T) Spline Socket
Output Spindle Thread M10 × 1.25 LH (Left-Hand Thread)
Included Hardware Clamp Bolts, Locating Screw, Rider Dish, Thrust Washer and Flange Nut
Product Net Weight Approximately 0.56kg
Lubrication Maintenance Side Grease Port
Compatible Platforms Compatible 26mm Pole Brush Cutters, Grass Trimmers, Pole Pruners and Clearing Saws
Compatible Attachments Nylon Line Trimmer Heads and Compatible 2T, 3T, 4T, 8T, 40T and 80T Metal Blades
Delivery Time 30 Days
Packaging Cardboard Packaging

 

Products Application

 

 

product-1024-1024

Dimensional and Spline Inspection

Before packing, the gearbox can be checked for key dimensions, including the shaft sleeve bore and 9T spline engagement. Gear rotation is also checked to identify binding or other visible mechanical issues.

These checks help confirm that the unit meets the specified assembly requirements before shipment.

product-1024-1024

Installation on a Compatible Brush Cutter

Installation begins by sliding the gearbox onto the 26mm shaft tube and engaging the 9-tooth drive shaft. Align the locating screw, then tighten the side clamp bolts according to the machine manufacturer's instructions.

Before use, confirm that the gearbox is seated correctly and that all fasteners are secure. The cutting attachment must also be mounted using the appropriate washer, rider dish and retaining nut.

product-1024-1024

Applications in Grass and Brush Clearing

When fitted to a compatible brush cutter, the gearbox drives the selected cutting attachment for routine vegetation maintenance. Depending on the machine's power output and the attachment used, applications may include grass trimming, weed removal, roadside vegetation maintenance and light brush clearing.

Always select a cutting attachment approved for the machine and gearbox, and follow the equipment manufacturer's operating and safety instructions.

Quality and Craftsmanship Details

 

product-1500-1500

 

 

 

Products Package

 

 

product-1500-1500

 

About Us

 

 

Jiaxing Norsun Trading Co., Ltd.

As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.

One-Stop Sourcing Hub

YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS

Direct Factory Network

200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA

Production process

 
product-496-372
Injection MoldingPlastic & Rubber Parts
product-496-372
CNC Lathe TurningHigh-Precision OD/ID
product-496-372
CNC Machining CenterMulti-Axis Milling
-5
Precision TappingCalibrated Thread Pitch
product-496-372
Clean Assembly LineSemi-Automated Line
product-496-372
100% QC InspectionOptical & Pressure Test
product-496-372
Protective PackagingCardboard & Rust-Proof
-6
Warehouse & LogisticsFast Dispatch & Storage

Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing

 

Expo experience

 

 

product-1500-2000

 

Customer Reviews

 

 

product-1500-2000

 

 

FAQ

 

 

Q: How can I check whether this gearbox fits my brush cutter?

A: Check the shaft tube diameter, drive shaft spline and output thread. This model is specified for a 26mm shaft tube, a 9-tooth drive shaft and an M10 × 1.25 LH output thread. Compare these dimensions with your original gearbox before ordering.

Q: Which cutting attachments can be used with this gearbox?

A:The output spindle uses an M10 × 1.25 LH left-hand thread. Compatible nylon line trimmer heads and metal blades may be used when their mounting dimensions and retention hardware match the gearbox and machine. Confirm attachment compatibility before installation.

Q: When should I lubricate the gearbox?

A:Inspect the grease condition according to the machine manufacturer's maintenance schedule and adjust the interval for heavy or frequent use. Add the recommended gear grease through the side service port when necessary. Avoid overfilling, and reinstall the grease port bolt securely.

 

 

 

 

Hot Tags: gear box 26mmx9t with screw, China gear box 26mmx9t with screw suppliers, CG430 Gear Case 28mmx9T, CG430 CG520 TL43 TL52 40 5 44 5 Steel Starter Small Pulley With Metal Pawl, TL43 CG430 40 5 Starter Assy, CG430 CG520 Brush Cutter Gear Box 28mmx9T, TL43 CG430 40 5 TL52 CG520 44 5 Bracket, CG430 CG520 Brush Cutter Gear Box

Send Inquiry