Jiaxing Norsun Trading Co., Ltd. is one of the leading manufacturers and suppliers of ms291 cylinder assy 47mm in China. With abundant experience, we are committed to providing high quality customized products with low price. Welcome to wholesale bulk CE approved products in stock here and get quotation from our factory.
Product Overview & Operating Details
STIHL MS291 / MS271 47mm Cylinder Piston Assembly
55.5cc Big Bore Engine Overhaul Kit with Round Clamp-Style Intake (1141 020 1206)

Product Introduction
This 47mm cylinder and piston assembly restores peak compression, aggressive torque, and sustained cutting speed on STIHL MS291 and MS291C chainsaws. It also serves as a bolt-on big-bore performance upgrade for MS271 and MS271C models sharing the same chassis and round clamp-style intake configuration, boosting engine displacement to 55.5cc without crankcase modification.
Cast from high thermal conductivity aluminum alloy with intersecting airflow cooling fins, the cylinder bore is electroplated with a wear-resistant nickel-silicon carbide (Nikasil) composite ceramic coating. The matching hypereutectic aluminum-silicon alloy piston incorporates a friction-reducing skirt coating, dual ductile iron piston rings, a hardened wrist pin, and circlips to ensure airtight cylinder sealing and rapid heat dissipation during heavy felling and bucking.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Chainsaw 47mm Cylinder Piston Assembly Kit |
| SKU | 0105070 |
| Brand | SeaSummer |
| Cylinder Assembly OEM | 1141 020 1206 |
| Compatible Chainsaws | STIHL MS291, MS291C, MS271, MS271C (Round Intake Versions) |
| Cylinder Bore Diameter | Φ 47.0 mm (Roundness & Cylindricity ≤ 0.008 mm) |
| Engine Displacement | 55.5 cc (Matched to 32.0 mm Piston Stroke) |
| Intake Connection Type | Round Clamp-Style Rubber Manifold Boot Connection |
| Cylinder Body Material | High Thermal Conductivity Die-Cast Aluminum Alloy |
| Bore Surface Treatment | Electroplated Nikasil / Nickel-Plated Composite Coating (HV ≥ 850) |
| Piston Material & Finish | High-Strength Hypereutectic Aluminum Alloy with Skirt Coating |
| Piston Ring Specification | 2 × High-Elasticity Ductile Cast Iron Rings (Chrome/Parkerized) |
| Piston Pin & Fasteners | Precision Hardened Steel Wrist Pin with 2 C-Clips |
| Engine Architecture | Clamshell Crankcase Design (Requires High-Temp Engine Pan Sealant) |
| Delivery Time | 30 Days |
| Packaging | Cardboard packaging |
Products Application

Pre-Assembly Inspection
Verify the round intake flange is smooth and free of burrs to ensure an airtight seal with the rubber intake boot. Measure the cylinder bore with a three-point internal micrometer and confirm piston ring end gap is within 0.15 mm to 0.30 mm.

Installation Guidelines
Install the piston on the connecting rod with the crown arrow pointing toward the exhaust port. Ensure both wrist pin circlips are fully seated in their grooves.
Align the piston ring end gaps with the brass locator pins in the piston ring lands.
Lubricate the cylinder wall, piston rings, and crankshaft bearings with clean two-stroke oil.
Compress the dual rings and slide the 47mm cylinder smoothly down over the piston.
Align the round rubber intake manifold over the cylinder intake spigot and torque the boot clamp firmly to eliminate vacuum leaks.
Apply a thin, continuous bead of high-temperature fuel-resistant sealant to the clamshell engine pan joint and torque crankcase bolts diagonally.

Break-In & Maintenance Practices
Run the newly assembled engine on a 25:1 high-grade two-stroke synthetic oil blend for the initial 2 to 3 tanks of fuel. Avoid continuous free-acceleration without cutting load to allow the rings to seat uniformly against the Nikasil wall.
Quality and Craftsmanship Details

Products Package

About Us
As an established supplier of outdoor power equipment and pneumatic components, Jiaxing Norsun Trading Co., Ltd. delivers streamlined B2B sourcing for global distributors. Backed by 200+ audited manufacturers in China, we ensure factory-direct wholesale pricing, strict incoming and outgoing inspection, and steady volume supply.
One-Stop Sourcing Hub
YOUR PROFESSIONAL ONE-STOP SOURCE
FOR 10000+ OUALITY PARTS
Direct Factory Network
200+ TRUSTED MANUFACTURING PARTNERS ACROSS CHINA
Production process








Quality Assurance & Traceability: Every pneumatic component is manufactured under strict ISO quality management standards-from raw material inspection and CNC machining to thread gauge verification and 100% pressure leak testing
Expo experience

Customer Reviews

Practical Questions & Ordering
Q:Can this 47mm cylinder kit be installed directly onto a STIHL MS271?
A:Yes. For MS271 chainsaws equipped with the round clamp-style intake manifold, this 47mm assembly bolts directly onto the crankcase and upgrades displacement from 50.2cc to 55.5cc.
Q: How do I confirm compatibility with the intake manifold?
A:This cylinder features a round spigot designed for clamp-on rubber intake boots. Check that your existing intake boot uses a circular metal/plastic clamp rather than bolt-on square flange adapters.
Q: Why is intake airtightness critical on 2-MIX engines?
A:Air leaks at the intake boot or clamshell crankcase joint create an excessively lean air-fuel mixture, leading to severe overheating and rapid piston scoring under load.
Q: What is the standard packaging and lead time?
A:Each cylinder kit is packaged in an individual protective box within master Cardboard packaging. Standard production delivery time is 30 Days.
Hot Tags: ms291 cylinder assy 47mm, China ms291 cylinder assy 47mm suppliers, MS291 Cylinder Assy 47mm, MS291 Piston Assy 47mm


